Journal of Dentistry And Oral Implants

Journal of Dentistry And Oral Implants

Journal of Dentistry and Oral Implants

Current Issue Volume No: 2 Issue No: 4

Short Communication Open Access Available online freely Peer Reviewed Citation

Occlusal Contact Recordings in Static and Functional Occlusion: Description of an Observational Method

1Lecturer at Harvard School of Dental Medicine, Department of Restorative Dentistry. Boston Massachusetts 02115 USA.

2Professor of Chemical and Biomedical Engineering. Massachusetts Institute of Technology. Cambridge Massachusetts 02139 USA

Author Contributions
Received 14 Mar 2022; Accepted 24 Mar 2022; Published 28 Mar 2022;

Copyright ©  2022 Philip L. Millstein

Creative Commons License     This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Competing interests

The authors have declared that no competing interests exist.


Philip L. Millstein DMD. MS, Edward W Merrill DSC (2022) Occlusal Contact Recordings in Static and Functional Occlusion: Description of an Observational Method . Journal of Dentistry And Oral Implants - 2(4):10-13.

Download as RIS, BibTeX, Text (Include abstract )

DOI 10.14302/issn.2473-1005.jdoi-22-4136


Centric occlusion, (CO), refers to occlusal contact of one jaw to another in a central location. Incisal guidance, (IG), describes the occlusion in anterior motion. Retro occlusion, (CR), transfers the central occlusion to a closed posterior position; it may be called a pseudo centric relation. In left lateral, (LL), occlusion the mandible moves in a lateral direction and in right lateral, (RL), it moves in the opposite direction. All these movements whether they take place in space or in occlusal contact are used to describe the occlusion.


When a dentist takes an occlusal record, it is of a static position however there are many other positions that can be recorded. When we examine and restore the dentition, we address various occlusal positions. Centric relation is a spatial position that is neutral from occlusal proprioception. It is used to position dental casts on an articulator. This spatial position is a baseline for a repeatable jaw position that is transferred to a dental articulator. The casts are then articulated. When we make a recording, it is a one-dimensional occlusal position such as centric occlusion. The term centric occlusion refers to a commonly used articulation which is centrally located between other areas of articulation. A composite of the various articulations could be of clinical value if used for diagnosis, treatment planning, and subsequent clinical examination.

When we study articulation, we use occlusal contact indicators 1, 2. The indicators provide a practical means to efficiently mark occlusal contact areas. The markings are not permanent, nor do they include contact intensity and measured surface area.

New materials bring new ideas 3. A silicone material can be used to record the occlusion It consists of a crystal-clear material that does not harden. It has a unique rheological response; It flows very slowly under gravity and can be mechanically deformed. Fillers can be incorporated and dispersed to make the material opaque. The material remains viscous. A dentist or staff member can make an instant impression and process it immediately for visual analysis. Mandibular excursions from one articulation to another can be made in a closed position 4, 5. An instant impression of centric occlusion and associated excursive articulations (CR, IG, LL ,RL) can be taken and imaged instantly. The cost is negligible.

To make an impression a triple tray is required 6. The procedure follows: the opaque material is placed in a triple tray which is carefully positioned intraorally and the patient is asked to close and ‘bite hard’. This is centric occlusion. We can stop at this articulation, or we can add other excursive articulations. With additions the recording becomes a functional occlusal recording (FO). The impression is placed on a light box and is photographed with a handheld phone/camera. We now have a permanent occlusal contact record. Figure 1 represents closure in centric occlusion. Contact areas are shown in white. Figure 2 represents a functional recording. Note the increase in volume.

Figure 1.Centric Occlusion
 Centric Occlusion

Figure 2.Functional Recording
 Functional Recording


If we as clinicians think in terms of making a composite recording as described, we will view the occlusion in terms of coordinated movements. A synchrony of static and functional articulations should provide the clinician with an assessment system that represents a more functional restoration and ultimately enhanced patient outcomes.


  1. 1.Millstein P L. (1983) An Evaluation of Occlusal Contact Marking Indicators: A Descriptive Qualitative Method. , Quintessence International 8, 813-818.
  1. 2.Millstein P L. (1985) An Evaluation of Occlusal Indicator Wax. , J Prosthet Dent 53, 570.
  1. 3.Philip L Millstein, Edward W Merrill. (2013) Patent number 8,066,512. Method and Apparatus for Occlusal Position Measurement and Recording.
  1. 4.Millstein P L, Sabrosa C E, Florencio S, Geber K. (2020) Consistency and Repeatability of Digitized Occlusal Records. , URRD 3(2), 24-29.
  1. 5.Millstein P L, Sabrosa C E, Wai Yung, Geber K. (2021) Occlusal Contacts for Implant Dentistry. , OHDM 20(6), 1-2.
  1. 6.Hahn S M, Millstein P L, Kinnunen M A, Wright R F. (2009) The Effect of Impression Volume and Double Arch Trays on The Registration of Maximum Intercuspation. , J Prosthet Dent 102, 362-67.

Cited by (1)

  1. 1.Millstein Philip, Sabrosa Carlos E., Yung Wai, Muzyka Brian, 2022, A Pressure Sensitive Occlusal Contact Indicator for Implant Restorations: An Observational Clinical Evaluation, Journal of Dentistry And Oral Implants, 2(4), 14, 10.14302/issn.2473-1005.jdoi-22-4360