JANJournal of Advances in Nanotechnology2689-2855Open Access PubUnited States10.14302/issn.2689-2855.jan-19-2598JAN-19-2598research-articleInfluence of Chemical Reaction on Marangoni Convective Flow of Nanoliquid in the Presence of Lorentz Forces and Thermal Radiation: A Numerical InvestigationGhulamRasool1*TingZhang1AnumShafiq2HulyaDurur3School of Mathematical Sciences, Zhejiang University, Hangzhou 310027, PR-ChinaDepartment of Mathematics, Preston University, Islamabad 44000, PakistanDepartment of Computer Engineering, Faculty of Engineering, Ardahan University, Ardahan, TurkeyCorresponding author InderKaur1Nottingham Trent university, UK.
Ghulam Rasool, School of Mathematical Sciences, Zhejiang University, Hangzhou 310027, PR-China, Email: grasool@zju.edu.cn
The authors have declared that no competing interests exist.
This study aims to numerically investigate the Marangoni convective flow of nanoliquid initiated by surface tension and heading towards a radiative Riga surface. The surface tension appears in the problem due to the gradients of temperature and concentration at the interface. The influence of first order chemical reaction is involved in the system with sufficient boundary conditions. Set of governing nonlinear PDEs is transformed into highly nonlinear ODEs using suitable transformations. HAM is applied for convergent series solutions. Impact of various pertinent fluid parameters on momentum, thermal and solutal boundary layers is analyzed graphically. The chemical reaction plays vital role in saturation of nanoparticles in the base fluid near the surface as well as away from it. The Lorentz forces originated by the Riga surface become powerful when the radiation parameter comes into effect. The significance of Riga plate is thus more prominent through thermal radiation. However, the magnetic effect dampens down for higher radiation parameter. Fluid parameters, Nusslt and Sherwood numbers are analyzed with detailed discussion and concluding remarks.
Carlo Marangoni, an Italian scientist introduced the concept of surface tension gradients driven fluid. This surface tension is popped up in the surface due to gradients of temperature and concentration on the occurrence of a liquid to liquid or liquid to air interface. A liquid with higher surface tension attracts more liquid from a region with low surface tension that ultimately results in fluid flow away from the regions having low surface tension. The gradients of temperature and concentration are therefore, critical factors for such convections under Marangoni effect. A significant interest developed in investigation of heat and mass convection under this phenomenon for its vast applications in industries such as welding, crystals, melting of electronic beams etc. Consequently, numerous researchers contributed in this field after Marangoni. Lin et al 1 worked on the convection under Marangoni phenomena with thermal gradients and magnetic number variation. Exact solutions achieved by Aly and Ebaid 2 in their study on Marangoni convection of nanoliquids achieved significant appreciation in nanoliquid convection analysis. Mat et al. 3, Gevorgyan et al. 4 and Al-sharafi et al. 5 have also contributed in this field of study with valuable results there in.
Engineers, Scientists working in the field of Nuclear energy, and Pharmaceutics come across the problem of rise in temperature in the working machine at a high speed performance. This situation was a big reason to worry in fluid mechanics before the introduction of Nanoliquids. The Idea of nanoliquid was introduced by Choi 6 in his research study. Pouring nanoparticles in a base fluid of poor conductivity showed drastically efficient results in the aspect of thermal conductivity of the base fluid. These impurities improved the conductivity of the fluid up to a significant level and the problem of machine heating was controlled with improved efficiency. Later on, Ibanez et al. 7 studied MHD nanoliquids analytically assuming convective boundary conditions. Hayat et al. 8 studied flow on stagnation point with an inclined magnetic field considering a nanofluid. Anum et al. 9 analyzed a third grade nanoliquid flow over a Riga plate with Cattaneo-Christov model in application. Hayat et al. 10 studied MHD-Powell-Eyring nanofluid flow with convective conditions. Alsabery et al. 11 studied heat flux in simulating the nanoliquid obtaining good results in Nusslt number. Numerous applications have been presented by Sheikholeslami and Ganji 12 in their research for useful nanoliquids. Nasrin et al. 13 studied free convection in aspect of nanoliquid passing through a chamber. Williamson nanoliquid has been analyzed by Bhatti and Rashidi 14. Parvin et al. 15 studied free convection through curved cavity using water based nanoliquid. Selimefendigil and Oztop 16 studied conjugate convection via titled cavity. Reddy et al. 17 performed numerical simulations of the mixed convection using two phase fluid model through a plate. For more related works one can see 18192021222324252627282930.
Fluid flow analysis in the field of fluid mechanics has always been dependent on various external influencing agents. Researchers working in the field of Astrology and Geo physics always need such kind of external agents to ease the movement of fluid in their processing. Most of the fluids for example plasma are typically dependent on the magnetic induction for their flow phenomena. Reason of this dependence of fluids on external agents is poor conductivity of fluids. The problem was somehow reduced with the introduction of Riga plate, an array of permanently mounted magnets and alternating electrodes as displayed in the model of this paper. Gailitis and Lielausis 31 introduced this array in their study for the first time which is treated as a hallmark in the field of fluid mechanics. Later on, Ahmed et al. 32 studied the impacts of zero mass flux on fluids involving Riga plate in their model. Sheikholeslami et al. 33 in their research concluded that temperature profile shows decreasing behavior with strong Marangoni number (r) due to Lorentz forces. Shafiq et al. 34 studied fluid point-flow based Walters-B model involving a Riga plate in their study and found fruitful results in the aspect of thermal characteristics. Adeel et al. 35 analyzed mixed convection nanoliquids mounting a vertical Riga plate in the way of fluid flow with strong suction.
Numerous articles on nanoliquids are available in the literature in the context of heat and mass flux with different variables and different systematic approaches. However, the use of Riga plate for generation of magnetic effect together with effect of chemical reaction is not found in the literature as for as to the knowledge of the author that assures the novelty of this research work. In this study, firstly we have involved the Riga plate to generate Lorentz forces in the system. The chemical reaction effect and thermal radiation effect are considered. Secondly, the set of PDEs is converted into set of nonlinear ODEs with transformations using the technique of non-dimensionalization 36. The non-dimensionalized system is subjected to HAM 373839404142 for convergent series solutions. Thirdly, the convergence of the results is analyzed graphically and finally, the results are plotted with sufficient discussion on the behavior of flow profiles.
Mathematical Model
A two dimensional steady and in-compressible nanoliquid is considered under Marangoni effect heading towards a radiative Riga surface. The flow is driven by tension appearing in the surface due to the temperature and concentration gradients. Thermal radiation and chemical reaction effects are utilized. The Brownian motion factor and Thermphoresis phenomena are of significant importance in this study. The temperature Tfrelates the temperature gradient whereas Cf relates the concentration gradient with base fluid. The heat-mass flux is considered along x-axis in Cartesian coordinates. Figure 1 displays the physical scenario for the aforementioned problem. The governing equations are therefore:
The surface tension s, being a function of T and C can be defined as follows:
where
with following boundary conditions,
Schematic Diagram
Here u, v represent the velocity components in x, y directions, respectively. μ is symbol of dynamic viscosity, v is the kinematic viscosity, ρf represents the density of fluid, K is used for chemical reaction, σ the surface tension, T0 and C0 are temperature and concentration on the surface, α is representing thermal diffusivity of the fluid, k is symbol of thermal conductivity of fluid. 𝜏 is used for ratio between heat capacity of the fluid, k is symbol of thermal conductivity of fluid. 𝜏 is used for ratio between heat capacity of the nanoparticles (PC)p and heat capacity of base fluid, (PC)f , DB is Brownian diffusion, DT is Thermophoresis, and qr is the typical radiative heat flux that can be written through Rosseland's approximation as follows:
where ∑* and K*are Stefan-Boltzmann's constant and coefficient of mean absorption, respectively. Using Taylor's series and omitting second and higher order terms, we get,
which upon substitution in (8) yields
Equation (10) in (3) gives,
Define,
We obtain,
With,
where 𝜸 = (Co𝜸C) / (To𝜸T) is the ratio of thermal to solutal surface tension s.t. R=((C0-C∞)γC)/((T0-T∞)γT) and Ma|L,T=(L𝝙T𝜸T|C)/ να , Ma|L,C=(L𝝙CγC|T)/να are thermal and solutal Marangoni numbers resulting 𝜸=Ma\L,T / Ma\L,C is the Marangoni ratio. (Q=L4πj0 M0/8ν2xρ) is the modified Hartman number, (Pr = ν/α) is the Prandtl number, (Nb=(ρc)p DB C0 x2/ (ρc)f L2 a) is the Brownian motion factor, Sc=ν/D is the Schmidt number,(Nt= (ρc)p DT x2) / (ρc)f L2 a ) is Thermophoretic factor, (Rd= 4Σ* T∞3/ kk*), is radiation parameter and, (β=πL/a) is dimensionless parameter. Skin friction coefficient, local Nusselt and Sherwood numbers are defined by,
where Rex = ux/v represents the local Reynolds number.
Numerical Simulation
The efficiency of Homotopy analysis method (HAM) for solving non-linear ODEs has been witnessed through literature. Researchers have given preference to this technique over various other famous methods. The method starts with assumption of some suitable initial guess subject to the boundary conditions given in the problem. Let,
One can see that (16) is satisfied. Define,
such that,
Where ai are constants for. i = 1-7.The 0thorder deformation problems are:
subject to,
Resulting the following system,
where p∈[0,1] is a typical embedding parameter and ĥf, ĥθ, ĥϕ are so-called auxiliary parameters with Nf, Nθ, Nϕ are the non-linear operators. For p=0,1, we have:
Using Taylor's expansion,
The convergence of (24) is purely dependent on the choice of ĥ. For p such that the system (24) converges, we write,
The mth order deformation problems are,
where ϕm=1for m>1 otherwise 0. Finally,
with following general solutions to the problem,
where ai are constants for i =1-7 and fm*(η), θm*(η),ϕm*(η)are special solutions.
Convergence of Solutions
The auxiliary parameters used for the flow profiles in series solutions in HAM are typically considered for controlling the convergence. These parameters significantly moderate the convergence rates thus are vital in achieving the convergence of final solutions. Convergence interval of f, θ and ϕ are sketched in Figure 2. One can see that the intervals of convergence for the aforementioned three profiles are (-0.40, 0.05), (-0.45, 0.05) and (-0.45, 0.05), respectively. The solutions show convergence after19th iteration for velocity profile and 26th iteration for temperature and concentration profiles, respectively.
H-Curves for Velocity, Temperature and Concentration Profiles
Results and Discussion
We examine the behavior of a surface tension driven nanofluid under the action of Lorentz forces generated by Riga surface and the chemical reaction inside the fluid. The flow is assumed in two dimensions such that x-axis is parallel to the fluid flow and y-axis is normal to the surface of the Riga plate. Influence of pertinent fluid parameters on flow profiles is plotted graphically and the discussion on these graphs is as follows. Figure 3 presents the behavior of velocity profile with variation in the dimensionless parameter β. The elevated values of β enhance the fluid viscosity that results in decreasing the flow momentum and corresponding boundary layer drops down. The flow velocity receives enhancement with elevated values of modified Hartman number as displayed in Figure 4. The graph of f‘(η) shows augmented variation with augmented values of. Q The induced Lorentz forces parallel to the flow profile enhance the surface tension produced in fluid that certainly drives the fluid with stronger force. Consequently the flow profile receives an increasing behavior. Figure 5 shows the behavior of velocity profile and associated boundary layer with variation in Marangoni ratio (r). One can see an increasing behavior in profile for elevated values of r. Figure 6 is the display of temperature profile against the dimensionless parameter β. The temperature drops down for elevated values of β. The rise in viscosity for elevated values of β results in slow motion of fluid and consequently lessens the collisions in between fluid particles as well as between fluid particles and nanoparticles that results in decreasing behavior of temperature profile. The same is noticed with augmented values of Q plotted in Figure 7. The temperature profile and associated boundary layer shows a decreasing behavior. A significantly prominent increase in temperature profile is witnessed for larger values of Prandtl number (Pr) portrayed in Figure 8. Since, Prandtl number is the ratio of momentum diffusivity to thermal diffiusivity, therefore, the elevated values of P𝜸 number enhance the momentum diffusivisity that results in enhancement of temperature profile and associated boundary layer. Not prominent, but comparatively an increasing behavior is noticed in temperature profile with enhancement in Thermophoretic factor (Nt) as plotted in Figure 9. The enhancement is dependent on the strong Thermophoretic force that results the away
Velocity profile against ß
Velocity profile against Q
Velocity Profile against r
Temperature profile against ß
Temperature profile against Q
Temperature profile against Pr
Temperature profile against Nt
movement of nanoparticles from the surface of Riga. Figure 10 is the display of influence of radiation factor (Rd) on the temperature profile. Temperature profile receives prominent enhancement in its behavior with elevated values of radiation factor. Thus the addition of radiation factor enhances the heat flux up to a significant level. Figure 11 is plotted to analyze the behavior of concentration of nanoparticles against the variation in Brownian motion factor (Nb). The stronger Brownian motion factor enhances the in-predictive motion of fluid particles that results in enhancement of temperature distribution. This enhancement in temperature drops down the concentration of nanoparticles near the Riga surface. The concentration profile enhances with elevated values of Schmidt number (Sc) for certain reasons as shown in Figure 12. The main reason is the enhancement in Brownian diffusivity that results in enhancement of associated boundary layer of concentration of nanoparticles in the base fluid. Elevated values of both the chemical reaction and radiation factor result in decreasing behavior of the concentration profile displayed in Figure 13 and Figure 14, respectively. The enhancement in chemical reaction results in away movement of nanoparticles from the surface that ultimately effects the concentration in the base fluid. The elevated values of Thermophoretic factor (Nt) result in enhancement of heat flux but drops down the mass flux while the enhancement in Prandtl results in decreasing behavior of the Sherwood number (the mass flux) as plotted in Figure 15, Figure 16 and Figure 17.
Temperature profile against Rd
Concentration profile against Nb
Concentration profile against Sc
Concentration profile against K
Concentration profile against Rd
Nusslt number against Nb
Sherwood number against Nb
Sherwood number against Nb
Comparison
This subsection summarizes the result with a precise comparison of present results with 33. Setting M=0 in 33 and Q=0=K=Rd in present model, the left over system of equations and the graphical results are exactly the same in either case as presented in Figure 18 for the velocity profile against Marangoni ratio (r). However, considering the effects of Q, K and Rd, we observe that there is a significant variation in the graphical results in the present work as compared to the previous work. For example, the elevated values of 𝜸 result in a rapid increasing behavior of velocity profile in the present case as compared to 33 confirming a more prominent effect of Marangoni ratio (r) on the flow profiles.
Comparison with 33
Closing Remarks
We examine the behavior of a surface tension driven nanofluid under the action of Lorentz forces generated by Riga surface and the chemical reaction inside the fluid. The flow is assumed in two dimensions such that x-axis is parallel to the fluid flow and y-axis is normal to the surface of the Riga plate. The final governing equations after application of suitable transformations with sufficient boundary conditions have been solved by HAM. The convergent series solutions are presented and analyzed graphically. Following are salient conclusions
Velocity profiles receives prominent enhancement with stronger Marangoni factor (r) however, the elevated values of dimensionless parameter β result in decreasing behavior of flow velocity and the associated boundary layer drops down.
Prandtl number is an enhancing factor for the temperature distribution.
Both the radiation and thermophoresis are increasing factors of temperature distribution.
Chemical reaction forces the away movement of nanoparticles from Riga surface. A prominent decreasing behavior is witnessed with elevated values of K.
Heat flux enhances with augmented values of Thermophoretic factor (Nt).
Mass flux declines with augmented values of Thermophoretic factor (Nt) and the Prandtl factor (Pr).
LinYZhengLZhangXMHD Marangoni boundary layer flow and heat transfer of pseudo-plastic nanofluids over a porous medium with a modified model, Mech Time-Depend Mater201541951936EH AlyEbaidAExact analysis for the effect of heat transfer on MHD and radiation Marangoni boundary layer nanofluid flow past a surface embedded in a porous medium201621562539MatN A ANM ArifinNazarRRadiation effect on Marangoni convection boundary layer flow of a nanofluid. Mathemat Sci20121616GSKA PetrosyanRS HakobyanRB Alaverdyan2017452362365Al-SharafiAbdullahZSahin AhmetSYilbas BekirSZMarangoni convection flow and heat transfer characteristics of water–CNT nanofluid droplets, Numerical Heat Transfer, Part A: Applications2016769763780ChoiSEnhancing thermal conductivity of fluids with nanoparticles, Developments and Applications of Non-Newtonian Flows19956699105ASMENew YorkIbáñezGLÃpezAPantojaJMoreiraJEntropy generation analysis of a nanofluid flow in MHD porous microchannel with hydrodynamic slip and thermal radiation20168997HayatTQayyumSAlsaediAShafiqAInclined magnetic field and heat source/sink aspects in flow of nanofluid with nonlinear thermal radiation201610399107NaseemAShafiqAZhaoLMU FarooqAnalytical investigation of third grade nanofluidic flow over a riga plate using Cattaneo-Christov model, Results in Physics20189961969HayatTHussainSMuhammadTAlsaediAAyubMRadiative flow of Powell–Eyring nanofluid with convective boundary conditions20175515231538AIAJ ChamkhaSalehHHashimIHeatline visualization of conjugate natural convection in a square cavity filled with nanofluid with sinusoidal temperature variations on both horizontal walls2016100835850SheikholeslamiMDHeated Permeable Stretching Surface in a Porous Medium Using Nanofluids20147535542NasrinRMA AlimAJ ChamkhaPrandtl number and aspect ratio20125573557365BhattiM MRashidiM MEffects of thermo-diffusion and thermal radiation on Williamson nanofluid over a porous shrinking/stretching sheet2016221567573ParvinSNasrinRMA AlimNF HossainAJ ChamkhaThermal Conductivity Variation on Natural Convection Flow of Water-Alumina Nanofluid in an Annulus20125552685274SelimefendigilFHF ÖztopConjugate natural convection in a cavity with a conductive partition and filled with different nanofluids on different sides of the partition20162166777RamReddyCMurthyP V S NAJ ChamkhaAM RashadSoret-driven thermosolutal convection induced by inclined thermal and solutal gradients in a shallow horizontal layer of a porous medium201364384392SheikholeslamiMVajraveluKMForced convection heat transfer in a semi annulus under the influence of a variable magnetic field201692339348SheikholeslamiMAbelmanSTwo phase simulation of nanofluid flow and heat transfer in an annulus in the presence of an axial magnetic field201514561569SheikholeslamiMKandelousiInfluence of Lorentz forces on nanofluid forced convection considering Marangoni convection. Author links open overlay panel201437833313339BhattiM MAbbasTRashidiM MEl-SayedA MNumerical simulation of entropy generation with thermal radiation on MHD Carreau nanofluid towards a shrinking sheet21618200MAbbasTMAM El-SayedYangZGeneration on MHD Eyring-Powell nanofluid through a permeable stretching surface, Entropy201618224SheikholeslamiMHayatTAlsaediAEffects of homogeneous and heterogeneous reactions in flow of nanofluids over a nonlinear stretching surface with variable surface thickness201609077SheikholeslamiMGanjiD DInfluence of Lorentz forces on nanofluid forced convection considering Marangoni convection2016224526537SheikholeslamiMEffect of uniform suction on nanofluid flow and heat transfer over a cylinder20153716231633AJ ChamkhaAbbasbandySAM RashadVajraveluKRadiation effects on mixed convection over a wedge embedded in a porous medium filled with a nanofluid, Transp. Porous Media201291261279ChamkhaA J MFlow and convective heat transfer of a ferro-nanofluid in a double-sided lid-driven cavity with a wavy wall in the presence of a variable magnetic field, Numerical Heat Transfer, Part A20156911861200SheikholeslamiMAJ ChamkhaUnsteady ferromagnetic liquid flow and heat transfer analysis over a stretching sheet with the effect of dipole and prescribed heat flux., Heat Transfer, Part A201669781793SheikholeslamiMHR AshorynejadRanaPSimultaneous effects of nanoparticles and slip on Jeffrey fluid through tapered artery with mild stenosis20162148695SheikholeslamiMFlow and convective heat transfer of a ferro-nanofluid in a double-sided lid-driven cavity with a wavy wall in the presence of a variable magnetic field201609185GailitisALielausisOOn a possibility to reduce the hydrodynamic resistance of a plate in an electrolyte, Appl Mag Rep Phys Inst1961121436AhmadRMustafaMTurkyilmazogluMBuoyancy effects on nanofluid flow past a convectively heated vertical Riga-plate: A numerical study201711182735SheikholeslamiMAJ ChamkhaInfluence of Lorentz forces on nanofluid forced convection considering Marangoni convection2017225750757ShafiqAHammouchZTurabAImpact of radiation in a stagnation point flow of Walters’ B fluid towards a Riga plate, Thermal Science and Engineering Progress201862733AdeelASaleemASumairaAFlow of nanofluid past a Riga plate20164024448AliIRasoolGAlrashedSNumerical simulations of reaction–diffusion equations modeling prey–predator interaction with delay20181141850054ShijunLHomotopy analysis method: A new analytic method for nonlinear problems199819957ShafiqANawazMHayatTAlsaediAMagnetohydrodynamic axisymmetric flow of a third-grade fluid between two porous disks20133599609ShafiqAJabeenSHayatTAlsaediACattaneo-Christov heat flux model for squeezed flow of third grade fluid, Surface Review and letters201724111ShafiqAHammouchZTN SindhuBioconvective MHD flow of Tangent hyperbolic nano-fluid with Newtonian heating2017759766ShafiqATN SindhuStatistical study of hydromagnetic boundary layer flow of Williamson fluid regarding a radiative surface, Result in Physics2017730593067MalikRKhanMShafiqAMushtaqMHussainMAn analysis of Cattaneo-Christov double-diffusion model for Sisko fluid flow with velocity slip2017712321237