<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD with MathML3 v1.3 20210610//EN" "https://jats.nlm.nih.gov/publishing/1.3/JATS-journalpublishing1-3-mathml3.dtd">
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" article-type="review-article" dtd-version="1.3" xml:lang="en">
<front>
<journal-meta>
<journal-id journal-id-type="publisher-id">J3DPA</journal-id>
<journal-title-group>
<journal-title>Journal of 3D Printing and Applications</journal-title>
</journal-title-group>
<issn pub-type="epub">2831-8846</issn>
<publisher>
<publisher-name>Open Access Pub</publisher-name>
<publisher-loc>United States</publisher-loc>
</publisher>
</journal-meta>
<article-meta>
<article-id pub-id-type="doi">10.14302/issn.2831-8846.j3dpa-22-4066</article-id>
<article-id pub-id-type="publisher-id">J3DPA-22-4066</article-id>
<article-categories>
<subj-group>
<subject>review-article</subject>
</subj-group>
</article-categories>
<title-group>
<article-title>Thin Film Deposition and Characterization Techniques</article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname>Temesgen</surname>
<given-names>Geremew</given-names>
</name>
<xref ref-type="aff" rid="idm1843067228">1</xref>
<xref ref-type="aff" rid="idm1843067876">*</xref>
</contrib>
</contrib-group>
<aff id="idm1843067228">
<label>1</label>
<addr-line>Debark University, Department of physics, Debark, Ethiopia </addr-line>
</aff>
<aff id="idm1843067876">
<label>*</label>
<addr-line>Corresponding author </addr-line>
</aff>
<author-notes>
<corresp>
Temesgen Geremew, <addr-line>Debark University,</addr-line><addr-line>Department of physics, Debark, Ethiopia. Orcid ID: </addr-line><addr-line>https://orcid.org/0000-0002-5144-9508</addr-line><email>[email protected]</email></corresp>
<fn fn-type="conflict" id="idm1842461924">
<p>The authors have declared that no competing interests exist.</p>
</fn>
</author-notes>
<pub-date pub-type="epub" iso-8601-date="2022-04-07">
<day>07</day>
<month>04</month>
<year>2022</year>
</pub-date>
<volume>1</volume>
<issue>2</issue>
<fpage>1</fpage>
<lpage>24</lpage>
<history>
<date date-type="received">
<day>15</day>
<month>01</month>
<year>2022</year>
</date>
<date date-type="accepted">
<day>05</day>
<month>04</month>
<year>2022</year>
</date>
<date date-type="online">
<day>07</day>
<month>04</month>
<year>2022</year>
</date>
</history>
<permissions>
<copyright-statement>© </copyright-statement>
<copyright-year>2022</copyright-year>
<copyright-holder>Temesgen Geremew</copyright-holder>
<license xlink:href="http://creativecommons.org/licenses/by/4.0/" xlink:type="simple">
<license-p>This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.</license-p>
</license>
</permissions>
<self-uri xlink:href="http://openaccesspub.org/j3dpa/article/1804">This article is available from http://openaccesspub.org/j3dpa/article/1804</self-uri>
<abstract>
<p>Thin films are everywhere in the modern world, with many of the technologies we depend upon in daily life being, in turn, dependent upon thin film technology. Chemical bath deposition includes principles of chemical bath deposition (CBD) and concept of solubility product, nucleation and film growth, thin film deposition mechanism in chemical bath deposition. The non-metallic ion source (anions) and metal ion source (cations) then react to form the compound.</p>
<p>The nucleation process plays an important role in determining the crystallinity and microstructure of the resultant film.</p>
<p>From the discussion of deposition techniques which are physical and chemical deposition methods. Physical deposition techniques contains sputtering deposition, electron beam evaporation and physical vapour deposition (PVD) process have been known for over 100 years and also fabricate films on the substrate, as well as the increase of the pressure in the chamber due to operation of the sources indicates directly that gases or vapors are desorbed. Chemical deposition process is economically effective and has been industrially exploited on a large scale. It can be summarized that thin film characterization techniques include X-ray diffraction (XRD), UV-Vis spectrophotometer, scanning electron microscopy, energy dispersive x-ray diffraction, transmission electron microscopy (TEM). X-ray diffraction (XRD) is a rapid and a powerful technique used to study the phase of a crystalline material, information on unit cell lattice parameters, crystal structure, crystal orientation and crystalline size.</p>
</abstract>
<kwd-group>
<kwd>Physical Methods</kwd>
<kwd>Chemical Methods</kwd>
<kwd>Thin Films</kwd>
<kwd>Chemical Bath Deposition</kwd>
<kwd>Characterization of Thin Films</kwd>
<kwd>Physical Vapour Deposition</kwd>
</kwd-group>
<counts>
<fig-count count="11"/>
<table-count count="2"/>
<page-count count="2"/>
</counts>
</article-meta>
</front>
<body>
<sec id="idm1842931636" sec-type="intro">
<title>Introduction</title>
<p>Thin-film deposition processes for solid-state device fabrication are needed in many steps in the fabrication process. It is important that compatible deposition processes are selected that do not interfere with the structures already built into the device. The process integration, which has to consider thermal effects, chemical and metallurgical compatibility as well as functional requirements and limitations, is a major consideration in successful process selection. Frequently, the deposition processes have to offer a high degree of flexibility in meeting the demands for specific device requirements. The process selection has to be based on adjusting deposition parameters such as film thickness, uniformity and composition <xref ref-type="bibr" rid="ridm1850439508">1</xref>. Thin film deposition is the technology of applying a very thin film of material between a few nanometers and about 100 micrometers, or the thickness of a few atoms onto a "substrate” surface to be coated, or onto a previously deposited coating to form layers. Thin film deposition manufacturing processes are at the heart of today’s semiconductor industry, solar panels, disk drives, and optical devices industries <xref ref-type="bibr" rid="ridm1850444188">2</xref>.</p>
<p>Thin films are everywhere in the modern world, with many of the technologies we depend upon in daily life being, in turn, dependent upon thin film technology. These may range in dimension from an atomic or molecular monolayer—perhaps only a few angstroms thick—to either mono- or multilayer coatings with a thickness of several microns. Such materials may have a huge range of extremely useful properties; they may be, for example, anti-reflective, impervious to oxygen and/or other gases, optically transparently electrically conductive, catalytic, and self-cleaning. Everyday examples featuring thin film technology include, but are not limited to, mobile phones, touch screens, laptops, and tablets <xref ref-type="bibr" rid="ridm1850446068">3</xref><xref ref-type="bibr" rid="ridm1850548732">4</xref>. Other important applications of thin films include band pass filters as used in gas analysis <xref ref-type="bibr" rid="ridm1850303012">5</xref>, mirrors used in astronomy <xref ref-type="bibr" rid="ridm1850299268">6</xref><xref ref-type="bibr" rid="ridm1850284892">7</xref><xref ref-type="bibr" rid="ridm1850271436">8</xref>, protective (e.g., biomedical, anticorrosive, and antimicrobial) coatings <xref ref-type="bibr" rid="ridm1850276044">9</xref>, architectural glass coatings (e.g., to reflect heat while transmitting visible light) <xref ref-type="bibr" rid="ridm1850258204">10</xref>, photovoltaic electricity generation <xref ref-type="bibr" rid="ridm1850255540">11</xref><xref ref-type="bibr" rid="ridm1850252012">12</xref>, and a great many others.</p>
<p>In the present time, thin films can be fabricated in various ways. The techniques can be divided into physical methods (Top-down approach) and chemical (Bottom-up approach) methods as described in <xref ref-type="table" rid="idm1850631732">Table 1</xref><xref ref-type="bibr" rid="ridm1850265044">13</xref><xref ref-type="bibr" rid="ridm1850262956">14</xref>.</p>
<table-wrap id="idm1850631732">
<label>Table 1.</label>
<caption>
<title> Classification of thin film deposition techniques </title>
</caption>
<table rules="all" frame="box">
<tbody>
<tr>
<td>
<inline-graphic id="idm1850629500" xlink:href="images/image1.png" mime-subtype="png"/>
</td>
</tr>
</tbody>
</table>
</table-wrap>
<p>The purpose of this review paper is to study deposition techniques of thin film, factor influencing deposition process, thin film characterization and its application. Distinguishing feature between physical deposition technique and chemical deposition technique. In Physical deposition techniques, such as, physical vapor deposition, electron beam’s evaporation and thermal evaporation techniques. In this technique, physical deposition method of the deposition processed through physically can’t take place chemical reaction. However, in chemical deposition techniques contains just like that of chemical vapour deposition, successive ionic layer adsorption and reaction (SILAR) and chemical bath deposition. In chemical deposition techniques which have been used ultrathin film growth. In addition, in chemical deposition method chemical reaction takes place but in physical deposition method doesn’t take place chemical reaction. In case of chemical deposition techniques is to produce high quality films.</p>
<sec id="idm1842929620">
<title>Physical Deposition Techniques</title>
<sec id="idm1842930052">
<title>Physical Vapor Deposition (PVD)</title>
<p>The main aspects of the physical vapour deposition methods are compiled in <xref ref-type="fig" rid="idm1850605412">Figure 1</xref>. Preparation of the films takes place in a vacuum chamber characterized by the residual pressure (in the range of 10-3 – 10-9 Pa) and by the composition and partial vapors ( in high vacuum (HV) range water vapor, oxygen, nitrogen and hydrocarbons, in the ultrahigh vacuum range (UHV) mainly CO, H and He). The vaporized species of the film material components are produced mainly by evaporation or sputter source(s) <xref ref-type="bibr" rid="ridm1850242212">15</xref>. The characteristics of the emitted species are the flux J, energy E, sizes (atoms, clusters) and ionization state (neutrals or ions) which depend on the material(s) and on the type and working parameters of the source. The kinetic energy, E, of species is 100-200 MeV at thermal evaporation and 5 to 10 eV of sputtered species at floating substrate potential. This last one is in the order of, or larger than the bonding energy in solids. The transport of free species emitted by the sources to the substrate makes it possible to manipulate their electrical charge and kinetic energy. However species of the desorbed or residual atmospheric gases/vapours and the products of the possible interactions between the source and the material have to be also considered. An increase of the pressure in the chamber due to operation of the sources indicates directly that gases or vapors are desorbed. This phenomenon has to be considered carefully, because one part of these species impinge directly on the substrate and participate in the structure evolution as unintentional impurities (contaminants).</p>
<fig id="idm1850605412">
<label>Figure 1.</label>
<caption>
<title> Main aspects of the physical vapour deposition </title>
</caption>
<graphic xlink:href="images/image2.jpg" mime-subtype="jpg"><alt-text>Figure 1. Main aspects of the physical vapour deposition</alt-text></graphic>
</fig>
<p>In this way the concentration of contaminant species in the condensing vapor beam might be more significant than could be estimated from the total pressure measured in some part of the system <xref ref-type="bibr" rid="ridm1850240196">16</xref>, <xref ref-type="bibr" rid="ridm1850237388">17</xref>. Most of these contaminants operate as inhibitors, <xref ref-type="bibr" rid="ridm1850231916">18</xref>, <xref ref-type="bibr" rid="ridm1850246748">19</xref> and might have a remarkable effect both on the structure and properties even at low concentration.</p>
</sec>
</sec>
<sec id="idm1842929260">
<title>Electron Beam Evaporation</title>
<p>Electron beam evaporation with subsequent vacuum condensation of metals and nonmetals <xref ref-type="bibr" rid="ridm1850244516">20</xref><xref ref-type="bibr" rid="ridm1850211908">21</xref>. This method is technologically simple, provides rather high coating growth rates (up to several micrometers per minute), and allows a wide range of process parameters <xref ref-type="bibr" rid="ridm1850208020">22</xref>. In this method the material is bombarded and heated by an electron beam. The electrons are accelerated by 2-6 KV to get high energy. A magnetic field is also applied to focus and bend the electron trajectory.</p>
</sec>
<sec id="idm1842928468">
<title>Thermal Evaporation Technique</title>
<p>One of the oldest techniques used for depositing thin films is thermal evaporation or vacuum evaporation and it is widely used in the laboratory and in industry for depositing metal and metal alloys <xref ref-type="bibr" rid="ridm1850206364">23</xref>. Thermal evaporation deals with the evaporation of the source materials in a vacuum chamber and condensing the evaporated particles on a substrate. This process is conventionally called vacuum deposition. In this technique, the material can be evaporated either by the heat generated by the resistance of a metal container <xref ref-type="bibr" rid="ridm1850200460">24</xref>. The possible problems that can be encountered in this technique are the source of material to be vaporized and its purity.</p>
</sec>
<sec id="idm1842928828">
<title>Chemical Deposition Techniques</title>
<p>The chemical deposition process is economically effective and has been industrially exploited to large scale.</p>
</sec>
<sec id="idm1842928684">
<title>Chemical Vapour Deposition (CVD)</title>
<p>Chemical Vapor Deposition (CVD) methods where the films are formed by chemical reaction between incoming species on the substrate. The gas and liquid sources are included in this method such as CVD (and varieties plasma-enhanced chemical vapor deposition (PECVD), plasma assisted chemical vapor deposition (PACVD), metal-organo chemical vapor deposition (MOCVD), low pressure chemical vapor deposition (LPCVD)), spray, electrodeposition, chemical Bath, dip coating; sol gel …etc.</p>
<p>Additionally, it requires an expensive high temperature reaction furnace and/or vacuum environment, and expensive high vapor pressure compounds. A schematic diagram involving the steps in the process of CVD is illustrated in <xref ref-type="fig" rid="idm1850611676">Figure 2</xref> according to <xref ref-type="bibr" rid="ridm1850216156">25</xref>.</p>
<fig id="idm1850611676">
<label>Figure 2.</label>
<caption>
<title> Schematic representation of CVD processes </title>
</caption>
<graphic xlink:href="images/image3.jpg" mime-subtype="jpg"><alt-text>Figure 2. Schematic representation of CVD processes</alt-text></graphic>
</fig>
<p>In chemical vapor deposition (CVD) the compounds of a vapor phase, often diluted with an inert carrier gas, react at a hot surface to deposit a solid film <xref ref-type="bibr" rid="ridm1850193716">26</xref><xref ref-type="bibr" rid="ridm1850192780">27</xref>. The importance of CVD is due to the versatility for depositing a large variety of elements and compounds at relatively low temperatures and at atmospheric pressure. Amorphous, polycrystalline, epitaxial, and uniaxially oriented polycrystalline films can be deposited with a high degree of purity. Aspects of CVD include the chemical reactions involved, the thermodynamics and kinetics of the reactors, and the transport of material and energy to and from the reaction site.</p>
<p>The following is a list of examples of some of the common types of chemical reaction used in CVD.</p>
</sec>
<sec id="idm1842935308">
<title>Pyrolysis</title>
<p>The simplest CVD process is pyrolysis, in which a gaseous compound decomposes on a hot surface to deposit a stable residue. Examples are the following: deposition of pyrolytic graphite from methane (CH4), which takes place at a substrate temperature of 22000C; deposition of silicon from monosilane (SiH4), which takes place in the range 800–13500C; and deposition of nickel from carbonyl [Ni(CO)4], which takes place at about 1000C <xref ref-type="bibr" rid="ridm1850184572">28</xref>.</p>
</sec>
<sec id="idm1842934588">
<title>Reduction</title>
<p>Hydrogen is the most commonly used reducing agent. Examples are deposition of silicon by the hydrogen reduction of silicon tetrachloride, which takes place at about 10000C, and deposition of tungsten by the hydrogen reduction of tungsten hexafluoride, which takes place at about 8000C. Hydrogen reduction is also used to accelerate the pyrolytic process by removal of unwanted byproducts as gaseous hydrogen compounds, for which less energy is required.</p>
</sec>
<sec id="idm1842933940">
<title>Oxidation</title>
<p>Silicon dioxide films can be deposited by the reaction of silane with oxygen.</p>
</sec>
<sec id="idm1842883780">
<title>Nitridation</title>
<p>Silicon nitride films can be deposited by reaction of silane with ammonia.</p>
</sec>
<sec id="idm1842883708">
<title>Carbidization</title>
<p>Titanium carbide films can be deposited by reaction to titanium tetrachloride with methane at a substrate temperature of 18500C.</p>
</sec>
<sec id="idm1842885004">
<title>Chemical-Transport Reaction</title>
<p>For these processes, the transport of the desired material from the source to the substrate on which it is to form a film depends on the difference in equilibrium constants between the reactant source and carrier phase, and the substrate and the carrier phase, when each are held at different temperatures. For example, the deposition of gallium arsenide by the chloride process depends on the reversible reaction</p>
<fig id="idm1850587604">
<graphic xlink:href="images/image4.png" mime-subtype="png"/>
</fig>
<p> (1) </p>
<p>Where T1 is the temperature of the solid GaAs source, T2 is the temperature of the solid GaAs substrate, and T1 > T2. This allows, in effect, indirect distillation of gallium arsenide from the hot source at temperature T1 to the cooler substrate at temperature T2 through an intermediate gas phase of different chemical composition.</p>
</sec>
<sec id="idm1842884068">
<title>Spray Pyrolysis</title>
<p>In this process the reagents are dissolved in a carrier liquid, which is sprayed onto a hot surface in the form of tiny droplets. On reaching the hot surface the solvent evaporates and the remaining components react, forming the desired material. An example is the formation of cadmium sulfide films by spray pyrolysis of cadmium chloride and thiourea dissolved in water with the substrate at about 3000C <xref ref-type="bibr" rid="ridm1850182844">29</xref>. <xref ref-type="table" rid="idm1850586164">Table 2</xref> shows many applications of CVD processes.</p>
<table-wrap id="idm1850586164">
<label>Table 2.</label>
<caption>
<title> Application of CVD processes </title>
</caption>
<table rules="all" frame="box">
<tbody>
<tr>
<td>Thin Film</td>
<td>Application</td>
</tr>
<tr>
<td>Epi-Si</td>
<td>Semiconductor material</td>
</tr>
<tr>
<td>a-Si</td>
<td>Solar cells</td>
</tr>
<tr>
<td>Ge</td>
<td>Tunnel diodes, solar cells</td>
</tr>
<tr>
<td>SiC</td>
<td>Protective against oxidation</td>
</tr>
<tr>
<td>BN</td>
<td>Diffusion source, crucible material</td>
</tr>
<tr>
<td>BP</td>
<td>Photovoltaics</td>
</tr>
<tr>
<td>AIN</td>
<td>Dielectric, piezoelectric material for acoustic wave beam</td>
</tr>
<tr>
<td>AIP</td>
<td>Electroluminescent diodes</td>
</tr>
<tr>
<td>AlAs</td>
<td>Electroluminescent diodes, solar cells</td>
</tr>
<tr>
<td>AlSb</td>
<td>Solar cells</td>
</tr>
<tr>
<td>GaN</td>
<td>Electroluminescent diodes</td>
</tr>
<tr>
<td>GaP</td>
<td>Electroluminescent diodes</td>
</tr>
<tr>
<td>ZnSe</td>
<td>Photoconductor, laser diodes</td>
</tr>
<tr>
<td>ZnTe</td>
<td>Electro-optical applications</td>
</tr>
<tr>
<td>CdS</td>
<td>Photoconductors, laser diodes, solar cells, detectors</td>
</tr>
<tr>
<td>CdS<sub>1-x</sub>Se<sub>x</sub></td>
<td>Lasers</td>
</tr>
<tr>
<td>Zn<sub>1-x</sub>Cd<sub>x</sub>S</td>
<td>Lasers</td>
</tr>
<tr>
<td>Cd<sub>1-x</sub>Hg<sub>x</sub>Te</td>
<td>Photoconductors, laser, photo diodes</td>
</tr>
<tr>
<td>Pb<sub>1-x</sub>Sn<sub>x</sub>Te</td>
<td>Photoconductors, laser, photo diodes</td>
</tr>
<tr>
<td>Pb<sub>1-x</sub>Sn<sub>x</sub>Se</td>
<td>Lasers</td>
</tr>
<tr>
<td>PbS</td>
<td>Photoconductors, lasers</td>
</tr>
<tr>
<td>PbTe</td>
<td>Infrared detectors</td>
</tr>
<tr>
<td>PbS<sub>1-x</sub> Se<sub>x</sub></td>
<td>Lasers</td>
</tr>
<tr>
<td>PbSe</td>
<td>Lasers</td>
</tr>
<tr>
<td>PbO</td>
<td>Photoconductors</td>
</tr>
<tr>
<td>SiO<sub>2</sub>; PSG; BSG;</td>
<td>ASG Passivation, etching mask, gate dielectric in MOS structures</td>
</tr>
<tr>
<td>Si<sub>3</sub>N<sub>4</sub></td>
<td>Diffusion masks, oxidation masks, anti-reflection coating in solar cells</td>
</tr>
<tr>
<td>GaAs</td>
<td>Semiconductor material</td>
</tr>
<tr>
<td>Gasb</td>
<td>Laser diodes</td>
</tr>
<tr>
<td>InP</td>
<td>Gun diodes, laser diodes</td>
</tr>
<tr>
<td>InAs</td>
<td>Laser diodes, Hall effect diodes</td>
</tr>
<tr>
<td>InSb</td>
<td>Photo electrodes</td>
</tr>
<tr>
<td>GaAs<sub>1-x</sub> P<sub>x</sub></td>
<td>High temperature rectifiers, electroluminescent diodes, laser diodes</td>
</tr>
<tr>
<td>InAs<sub>1-x</sub> P<sub>x</sub></td>
<td>Photo cathodes, electro-optical applications</td>
</tr>
<tr>
<td>InAs<sub>1-x</sub>Sb<sub>x</sub></td>
<td>Laser diodes</td>
</tr>
<tr>
<td>GaAs<sub>1-x</sub>Sb<sub>x</sub></td>
<td>Laser diodes, photo cathodes</td>
</tr>
<tr>
<td>Ga<sub>1-x</sub>In<sub>x</sub>As</td>
<td>Laser diodes, photo cathodes</td>
</tr>
<tr>
<td>Ga<sub>1-x</sub>In<sub>x</sub>P</td>
<td>Luminescent diodes</td>
</tr>
<tr>
<td>Ga<sub>1-x</sub>Al<sub>x</sub>As</td>
<td>Laser diodes, solar cells</td>
</tr>
<tr>
<td>In<sub>x</sub>Al<sub>1-x</sub>P</td>
<td>Electroluminescent diodes, laser diodes</td>
</tr>
<tr>
<td>W</td>
<td>Metallization, conductive path in integrated circuits</td>
</tr>
<tr>
<td>Mo</td>
<td>Schottky diodes, conductive path</td>
</tr>
<tr>
<td>Ta</td>
<td>Conductive path</td>
</tr>
</tbody>
</table>
</table-wrap>
</sec>
<sec id="idm1842829060">
<title>Physicochemical Bases</title>
<p>In the CVD process gaseous chemical compounds, often diluted with an inert carrier gas, react on hot surfaces in the reactor to form solid films, <xref ref-type="fig" rid="idm1850471260">Figure 3</xref>. The CVD process can be subdivided as follows:</p>
<fig id="idm1850471260">
<label>Figure 3.</label>
<caption>
<title> with the chemical vapor deposition, e.g., of metals, a precursor molecule at a temperature T1 reacts with hydrogen (H2) to a complex, which deposits itself to the coated surface. At the substantially higher temperature T2 of the substrate the complex decomposes into an organic remainder of R and a metal atom, which forms the nucleus for layer growth with others</title>
</caption>
<graphic xlink:href="images/image5.jpg" mime-subtype="jpg"><alt-text>Figure 3. with the chemical vapor deposition, e.g., of metals, a precursor molecule at a temperature T1 reacts with hydrogen (H2) to a complex, which deposits itself to the coated surface.</alt-text></graphic>
</fig>
<p>Production of a reaction gas mixture, Transportation phase, Deposition and film formation.</p>
<p>The relatively high gas pressure is characteristic in the transportation phase. It can amount to between 10mbar and 10bar. The mean free path 𝜆 is small in relation to the dimensions of the recipient and/or the distance source – substrate d. CVD processes occur at small Knudsen numbers Kn</p>
<fig id="idm1850468956">
<graphic xlink:href="images/image6.png" mime-subtype="png"/>
</fig>
<p>(2)</p>
<p>The high process pressure distinguishes CVD from PVD. Because of the collisions in the gaseous phase of the CVD process, the molecules, which create the film structure, must be sluggish in reaction, so that no powder develops in the gaseous phase and no damaging secondary reactions take place. This means that as original substances not atoms, like in the PVD process, but molecules that are sluggish in reaction must be used. An ideal characteristic curve for a thermal CVD process is shown in <xref ref-type="fig" rid="idm1850471260">Figure 3</xref>.</p>
<p>At low temperatures (range I) the deposition process is determined by the reactions taking place at the surface. The deposition is described by Arrhenius law:</p>
<fig id="idm1850482564">
<graphic xlink:href="images/image7.png" mime-subtype="png"/>
</fig>
<p>(3)</p>
<p>Where E is the activation energy and R is the universal gas constant. At higher temperatures the reaction rates at the surface become so fast that the deposition is</p>
<p><xref ref-type="fig" rid="idm1850471260">Figure 3</xref> with the chemical vapor deposition, e.g., of metals, a precursor molecule at a temperature T1 reacts with hydrogen (H2) to a complex, which deposits itself to the coated surface. At the substantially higher temperature T2 of the substrate the complex decomposes into an organic remainder of R and a metal atom, which forms the nucleus for layer growth with others</p>
<p><xref ref-type="fig" rid="idm1850479540">Figure 4</xref>. Ideal CVD characteristics curve, I the deposition process is determined by the reactions taking place at the surface, II determined by the flow in the reactor and approximated temperature- independently, III homogeneous reactions in the gaseous phase</p>
<fig id="idm1850479540">
<label>Figure 4.</label>
<caption>
<title> Ideal CVD characteristics curve, I the deposition process is determined by the reactions taking place at the surface, II determined by the flow in the reactor and approximated temperature- independently, III homogeneous reactions in the gaseous phase</title>
</caption>
<graphic xlink:href="images/image8.jpg" mime-subtype="jpg"/>
</fig>
<fig id="idm1850480116">
<label>Figure 5.</label>
<caption>
<title> Different types of CVD characteristics curves, (1) suitable for batch reactor, (3) for high deposition rates</title>
</caption>
<graphic xlink:href="images/image9.jpg" mime-subtype="jpg"><alt-text>Figure 5. Different types of CVD characteristics curves, (1) suitable for batch reactor, (3) for high deposition rates</alt-text></graphic>
</fig>
<p> </p>
<p>Determined by the transport through the gaseous phase. In this range the deposition rate and the uniformity of the film are determined by the flow in the reactor and approximated temperature independently (range II). At still higher temperatures (range III) the deposition is controlled by homogeneous reactions in the gaseous phase, which can finally lead to powder formation. The deposition rate is thereby reduced. <xref ref-type="fig" rid="idm1850480116">Figure 5</xref> shows the different types of characteristic curves. The selection of the operating point on the CVD characteristic curve depends on:</p>
<p>1. The form of the work pieces</p>
<p>2. The film structure.</p>
<p><xref ref-type="fig" rid="idm1850480116">Figure 5</xref> Different types of CVD characteristics curves, (1) suitable for batch reactor, (3) for high deposition rates</p>
<p>If complicated forms or porous work pieces are to be coated on the inside, then the operating point is always selected within the kinetically controlled range, because of the low deposition rate at which no eluviation of the gaseous phase occurs. With simple forms, e.g., coating of plane surfaces, other aspects are of importance. Thus, for example, the desired film structure requires a defined operating point. This is valid, for example, in the case of the Si epitaxy <xref ref-type="bibr" rid="ridm1850180828">30</xref><xref ref-type="bibr" rid="ridm1850165900">31</xref>. At the silicon surface silane decomposes according to the chemical equation</p>
<fig id="idm1850477308">
<graphic xlink:href="images/image10.png" mime-subtype="png"/>
</fig>
<p>(4) </p>
<p>Moreover, the silicon growth rate is proportional to the partial pressure of silane. For cases where the reaction is surface controlled, epitaxial growth proceeds according to the following steps: Mass transfer of the reactant molecules (SiH4) by diffusion from the turbulent film across the boundary film to the silicon surface.</p>
<p>1. Adsorption of the reactant atoms on the surface.</p>
<p>2. The reaction of a series of reactions that occur on the surface.</p>
<p>3. Desorption of the byproduct molecules.</p>
<p>4. Mass transfer of the byproduct molecules by diffusion through the boundary film to the main gas stream.</p>
<p>5. Lattice arrangement of the adsorbed silicon atoms.</p>
<p>The overall deposition rate is determined by the slowest process in the list above. Under steady- state conditions all steps occur at the same rate and the epitaxial film grows uniformly. Depending upon deposition conditions different reactor types are used. For the kinetically controlled range (range I) batch reactors are suitable. The flux plays a subordinated role in this case only. Due to low eluviation’s larger numbers of work pieces can be coated at the same time. In the range II the deposition is strongly affected by the flux, however higher coating rates are to be expected.</p>
</sec>
<sec id="idm1842804100">
<title>Successive Ionic Layer Adsorption and Reaction (SILAR)</title>
<p>SILAR is an aqueous solution technique based on sequential reactions at the substrate solution interface for the deposition of thin films. The SILAR was developed by Nicolau for the deposition of zinc and cadmium chalcogenides thin films <xref ref-type="bibr" rid="ridm1850164748">32</xref>. The adsorption is a surface phenomenon between ions and surface of substrate and is possible due to attraction force between ions in the solution and surface of the substrate. These forces may be cohesive forces or Van der Waals forces or chemical attractive forces. Atoms or molecules of substrate surface possess unbalanced or residual force and hold the substrate particles. Rinsing follows each reaction, which enables heterogeneous reaction between the solid phase and the solvated ions in the solution <xref ref-type="bibr" rid="ridm1850161940">33</xref>. In spite of its simplicity, SILAR has a number of advantages. It is relatively inexpensive, simple and convenient for large area deposition.</p>
<p>In principle, it is possible to deposit metal chalcogenide thin films using this method on to a variety of substrates <xref ref-type="bibr" rid="ridm1850156324">34</xref>. The starting materials are commonly available and cheap. As it is a chemical method, a large number of varieties of substrates can be coated. Thus, any insoluble surface to which the solution has free access will be a suitable substrate for the deposition.</p>
<p><xref ref-type="fig" rid="idm1850444764">Figure 6</xref> represents the deposition of thin film using SILAR method. It consists of four different steps such as adsorption, rinsing (a and b), reaction and rinsing (c and d) <xref ref-type="bibr" rid="ridm1850161940">33</xref>.</p>
<fig id="idm1850444764">
<label>Figure 6.</label>
<caption>
<title> Schematic representation of SILAR method (a) cationic precursor and (c) anionic precursor and (b, d) deionised water 35.</title>
</caption>
<graphic xlink:href="images/image11.jpg" mime-subtype="jpg"/>
</fig>
</sec>
<sec id="idm1842802660">
<title>Chemical Bath Deposition</title>
<p>The Chemical bath deposition (CBD) method is most commonly used because it is a very simple, cost effective and economically reproducible technique that can be applied in large area deposition at low temperature. Chemical bath deposition is used to deposit thin films of a wide-range of materials <xref ref-type="bibr" rid="ridm1850149772">36</xref>. The deposition mechanism is largely the same for all such materials. A soluble salt of the required metal is dissolved in an aqueous solution, to release cations. The non-metallic element is provided by a suitable source compound, which decomposes in the presence of hydroxide ions, releasing the anions. The anions and cations then react to form the compound <xref ref-type="bibr" rid="ridm1850147684">37</xref>. In addition, the experimental set up of CBD techniques is described in <xref ref-type="fig" rid="idm1850440588">Figure 7</xref> below.</p>
<fig id="idm1850440588">
<label>Figure 7.</label>
<caption>
<title> Experimental set up of CBD technique 38</title>
</caption>
<graphic xlink:href="images/image12.jpg" mime-subtype="jpg"><alt-text>Figure 7. Experimental set up of CBD technique 38</alt-text></graphic>
</fig>
<p>Principles of Chemical Bath Deposition (CBD) and Concept of Solubility Product CBD method is most commonly used because it is a very simple, cost effective and economically reproducible technique that can be applied in large area deposition at low temperature. Chemical bath deposition is used to deposit thin films of a wide-range of materials. The deposition mechanism is largely the same for all such materials. A soluble salt of the required metal is dissolved in an aqueous solution to release cations. The non-metallic element is provided by a suitable source compound which decomposes in the presence of hydroxide ions, releasing the anions. The anions and cations then react to form the compound. This technique is based on the controlled release of metal ion (M 2+) and sulphide (S 2−) or selenide (Se 2−) ions in an aqueous bath in which the substrates are immersed. In this process, release of metal ion (M 2+) is controlled by using a suitable complexing agent <xref ref-type="bibr" rid="ridm1850172884">39</xref>. The solubility product gives the solubility of a sparingly soluble ionic salt (this includes salts normally termed insoluble). Sparingly soluble salt CD, when placed in water, a saturated solution containing C + and D− ions in contact with undissolved solid CD is obtained and equilibrium is established between the solid phase and in the solution as</p>
<fig id="idm1850441884">
<graphic xlink:href="images/image13.png" mime-subtype="png"/>
</fig>
<p>(5)</p>
<p> </p>
<p>Applying law of mass action</p>
<fig id="idm1850439724">
<graphic xlink:href="images/image14.png" mime-subtype="png"/>
</fig>
<p>(6)</p>
<p>Where K solubility [C<sup>+</sup>],[D<sup>-</sup>] and [CD] are concentrations of C<sup>+</sup>, D<sup>-</sup> in the solution, respectively. The concentration of pure solid is a constant number i.e.</p>
<fig id="idm1850437204">
<graphic xlink:href="images/image15.png" mime-subtype="png"/>
</fig>
<p>(7) (8) (9)</p>
<p>Since K and <italic>K</italic><sup>* </sup>are constants of K<italic>K</italic><sup>*</sup>is also constant, say K<sub>s</sub>,therefore Eq.</p>
<fig id="idm1850435260">
<graphic xlink:href="images/image16.png" mime-subtype="png"/>
</fig>
<p> (10)</p>
<p>The constant KS is called solubility product (SP) and [C<sup>+</sup>][D<sup>−</sup>] is called ionic product (IP). When the solution is saturated the ionic product is equal to the solubility product. When the ionic product exceeds the solubility product (IP/SP = S>1), the solution is supersaturated (where S is the degree of super saturation), precipitation occurs and ions combine on the substrate and in the solution to form nuclei [40].</p>
</sec>
<sec id="idm1842811660">
<title>Nucleation and Film Growth</title>
<p>Growth of thin films, as in all phase transformation, involves the process of nucleation and growth on the substrate or growth surface. The nucleation process plays an important role in determining the crystallinity and microstructure of the resultant film. For the deposition of thin films with thickness in the nanometer region, the initial nucleation process is even more important. The size and shape of the initial nuclei are assumed to be solely dependent on the change of Gibbs free energy, due to supersaturation, and on the combined effect of surface and interface energies governed by Young's equations <xref ref-type="bibr" rid="ridm1850123908">41</xref>.</p>
</sec>
<sec id="idm1842810292">
<title>Thin Film Deposition Mechanism in Chemical Bath Deposition</title>
<p>There are four main mechanisms leading to compound formation, whose operation depends on the specific process and reaction parameters. The thin film growth in CBD occurs via the following four possible mechanisms.</p>
<p>1. Simple Ion-by-Ion Mechanism</p>
<p>2. Simple Cluster (Hydroxide) Mechanism</p>
<p>3. Complex-Decomposition Ion-by-Ion Mechanism</p>
<p>4. Complex-Decomposition Cluster Mechanism</p>
</sec>
<sec id="idm1842808420">
<title>Simple Ion-by-Ion Mechanism</title>
<p>In most of the CBD’s, the ion-by-ion conceptually simplest mechanism, often assumed to be the operative one in general. It occurs by sequential ionic reactions. The general reaction for the mechanism</p>
<fig id="idm1850429788">
<graphic xlink:href="images/image17.png" mime-subtype="png"/>
</fig>
<p>(11)</p>
<p>The formation of solid MmXn is based on the principle that when the ion product, (Mn+)(Xm−), exceeds the solubility product, Ksp, of MmXn, then MmXn can form as a solid phase, although a larger ionic product may be required if super saturation occurs. If the ion product does not exceed Ksp, no solid phase will form, except possibly transiently due to local fluctuations in the solution, and the small solid nuclei will redissolve before growing to a stable size. For that reason, the precipitation process is an equilibrium rather than a one-way reaction.</p>
</sec>
<sec id="idm1842808492">
<title>Simple Cluster (Hydroxide) Mechanism</title>
<p>In most of the CBD’s, the preparative conditions are chosen so that the formation of metal hydroxide should be avoided. However, in reality, CBD’s are quite often carried out under conditions where a metal hydroxide (or hydrated oxide) is formed. This might seem to imply that a precipitate of metal hydroxide (M (OH)n) is formed at the start of the CBD. In fact, the metal hydroxide formed is either as a colloid (rather than a precipitate) or as an adsorbed species on the substrate but not in the bulk of the solution. In this case metal chalcogenide (<italic>M</italic><sup>m</sup><italic>X</italic><sup>n</sup>) is formed by reaction of <italic>X</italic><sup><italic>m− </italic></sup>ion with the <italic>M(OH)</italic><sup><italic>n</italic></sup><italic>.</italic></p>
<fig id="idm1850424820">
<graphic xlink:href="images/image18.png" mime-subtype="png"/>
</fig>
<p>(12)</p>
<p>Followed by</p>
<fig id="idm1850425108">
<graphic xlink:href="images/image19.png" mime-subtype="png"/>
</fig>
<p>(13)</p>
<p>The deposition of the thin film takes place through the condensation of the metal and sulphide/selenide ions on this initial layer which acts as a catalytic surface.</p>
</sec>
<sec id="idm1842772044">
<title>Complex-Decomposition Ion-by-Ion Mechanism</title>
<p>In this mechanism, complexation of free metal cations (Mn+) by chalcogenide source (thiourea, thioacetamide) gives M-chalcogenide source complex ion. This is illustrated by the example of CdS deposition from thiourea</p>
<fig id="idm1850422372">
<graphic xlink:href="images/image20.png" mime-subtype="png"/>
</fig>
<p>(14)</p>
<p>This ion is hydrolyzed by breaking the S-C bond to form CdS.</p>
<fig id="idm1850422948">
<graphic xlink:href="images/image21.png" mime-subtype="png"/>
</fig>
<p>(15)</p>
<p>This would lead to CdS formation in solution. If Cd<sup>2+</sup> is adsorbed on the substrate (either directly or indirectly through a hydroxide linkage) then the above reaction occurs and CdS is formed on substrate, the result would be film growth by ion-by-ion. This mechanism is also useful in acidic solution; thioacetamide decomposition at intermediate pH values, particularly in weakly acidic solution (pH ≥ 2) has been suggested to occur through a thioacetamide complex.</p>
</sec>
<sec id="idm1842771900">
<title>Complex-Decomposition Cluster Mechanism</title>
<p>The complex-decomposition cluster mechanism is based on the formation of a solid phase, instead of reacting directly with a free anion; it forms an intermediate complex with the anion-forming reagent. For CdS deposited from a thiourea bath the process can be described as:</p>
<fig id="idm1850421004">
<graphic xlink:href="images/image22.png" mime-subtype="png"/>
</fig>
<p>(16)</p>
<p> </p>
<p>Cd(OH)<sub>2 </sub>is one molecule in the solid phase cluster. This complex or a similar one if it contains ammine ligands then decomposes to CdS.</p>
<fig id="idm1850450740">
<graphic xlink:href="images/image23.png" mime-subtype="png"/>
</fig>
<p>(17)</p>
<p>The S-C bond of the thiourea breaks, leaving the S bond to Cd. It is suggested that Cd(OH)<sub>2</sub> forms initially on the substrate and catalyzes the thiourea decomposition. The catalytic effect of the solid surface could be to decompose thiourea to sulphide ion and not necessarily to catalyze the complex- decomposition mechanism <xref ref-type="bibr" rid="ridm1850142716">38</xref>.</p>
</sec>
<sec id="idm1842769236">
<title>Thin Film Characterization Techniques</title>
<p>The thin-film characteristics are quite different from the respective bulk counterparts. Materials, having at least one of the dimensions in the nanometer scale (less than 100 nm), are known as nanostructured materials, where properties are significantly different because of geometrical restrictions, causing novel physical and chemical properties. Thin films (either they are polycrystalline, or single crystal (epitaxial) or amorphous form) of a thickness (\ 1 lm), possess higher surface energy due to its large surface to volume ratio; thus responsible for different physical, material and chemical properties than their bulk counterpart <xref ref-type="bibr" rid="ridm1850122972">42</xref><xref ref-type="bibr" rid="ridm1850119588">43</xref>. This scope of tailoring materials’ to create the desired physical properties led to large research activities in many areas such as microelectronics, optoelectronics, and sensors <xref ref-type="bibr" rid="ridm1850114980">44</xref>. In these devices, precise growth of multiple layers of films (in either amorphous, polycrystalline or epitaxial form) of polymers, metals, semiconductors, and insulators is essential to get the desired outcome. These films are deposited using different techniques such as molecular beam epitaxy (MBE), chemical vapor deposition (CVD), pulsed laser deposition (PLD), sputtering, thermal evaporation, e-beam evaporation, electroplating, and spin coating techniques <xref ref-type="bibr" rid="ridm1850122972">42</xref><xref ref-type="bibr" rid="ridm1850111596">45</xref>.</p>
<p>Thin film material properties do not always resemble those measured at the bulk level. The application of thin films is becoming increasingly interdisciplinary in nature, leading to new demands for film characterization and properties measurements for both individual films and multilayer films <xref ref-type="bibr" rid="ridm1850109580">46</xref>.</p>
<p>Measurements and characterization of the film thickness, micro-structure and composition can be carried out using various techniques. They include X-ray diffraction (XRD), UV-Vis spectrophotometer, scanning electron microscopy, energy dispersive x-ray diffraction, transmission electron microscopy (TEM). In this review, we will use for structural analysis X-ray diffraction, for optical analysis UV-Vis spectrometer and for morphological analysis scanning electron microscopy.</p>
</sec>
<sec id="idm1842768084">
<title>X-ray Diffraction (XRD)</title>
<p>X-ray diffraction (XRD) is a rapid and a powerful technique used to study the phase of a crystalline material, information on unit cell lattice parameters, crystal structure, crystal orientation and crystalline size. XRD is widely used to characterize unknown crystalline materials. The working principle of the XRD technique relies on constructive interference of X-rays and a crystalline sample. In a crystal, the atoms distribute regularly in space, which comes into being crystal lattices <xref ref-type="bibr" rid="ridm1850108428">47</xref>. The structural characterizations have extensively used XRD, which is a non-destructive technique. This technique can be used to determine the crystal structure of metals and alloys, minerals, inorganic compounds, polymers and organic materials. A typical XRD pattern consists of a series of peaks, in which peak intensity is plotted on the Y-axis and diffraction angle (2θ) along X- axis. These peaks are called reflections. The positions of the peaks in the XRD pattern depend on the crystal structure of the material while intensities depend on many factors like atomic structure factors, incident intensity, slit width, number of grains etc. <xref ref-type="bibr" rid="ridm1850105260">48</xref>. X-rays are a type of electromagnetic radiation with a wavelength between 0.1 and 100 Ȧ exhibiting a high energy. In 1895 Wilhelm Conrad Röntgen first discovered X-rays and was therefore awarded the Nobel Prize in Physics in 1901. Hence, it is one of the most fundamental analytical techniques in research fields like solid state chemistry and material science. In a common XRD setup, X-rays are generated in a high vacuum tube <xref ref-type="bibr" rid="ridm1850104468">49</xref>. Bragg’s law expressed mathematically the crystal diffraction by considering a crystal made of parallel crystals of ions, spaced a distance d apart, and the constructive interference of the rays. By considering a crystal as made out of parallel crystals of ions, spaced a distance d apart <xref ref-type="fig" rid="idm1850448940">Figure 8</xref>.</p>
<fig id="idm1850448940">
<label>Figure 8.</label>
<caption>
<title> X-ray diffraction from crystal.</title>
</caption>
<graphic xlink:href="images/image24.jpg" mime-subtype="jpg"><alt-text>Figure 8. X-ray diffraction from crystal.</alt-text></graphic>
</fig>
<p>The conditions for a sharp peak in the intensity of the scattered radiation are:</p>
<p>1. That the X-rays should be specularly reflected by the ions in any one plane.</p>
<p>2. The reflected rays from successive planes should interfere constructively. Path difference between consecutive rays reflected from adjoining crystal is rays is an integral multiple of the wavelength, That is</p>
<fig id="idm1850380740">
<graphic xlink:href="images/image25.png" mime-subtype="png"/>
</fig>
<p>(18)</p>
<p>Where ∆d is the path difference and n = 1, 2, 3.</p>
<p>For the rays to interfere constructively, this path difference must be an integral number of wavelengths λ. The path difference ∆d between rays 1 and 2 in the Figure 8 is:</p>
<fig id="idm1850379012">
<graphic xlink:href="images/image26.png" mime-subtype="png"/>
</fig>
<p> (19)</p>
<p> </p>
<p>If and only if this path difference is equal to any integer value of the wave length</p>
<fig id="idm1850377860">
<graphic xlink:href="images/image27.png" mime-subtype="png"/>
</fig>
<p> </p>
<p> (20)</p>
<p>In equating 𝐴𝐵 and 𝐵𝐶, we have assumed that the angles of incidence equal the angles of reflection. When the inter planar distance is denoted by d, it follows from the Figure 8 that</p>
<fig id="idm1850375772">
<graphic xlink:href="images/image28.png" mime-subtype="png"/>
</fig>
<p> (21) </p>
<p>And</p>
<fig id="idm1850375988">
<graphic xlink:href="images/image29.png" mime-subtype="png"/>
</fig>
<p> (22)</p>
<p>From which it follows that</p>
<fig id="idm1850373756">
<graphic xlink:href="images/image30.png" mime-subtype="png"/>
</fig>
<p> (23)</p>
<fig id="idm1850374620">
<graphic xlink:href="images/image31.png" mime-subtype="png"/>
</fig>
<p> (24)</p>
<p>Putting everything together we get</p>
<p> (25)</p>
<fig id="idm1850371236">
<graphic xlink:href="images/image32.png" mime-subtype="png"/>
</fig>
<p>Applying the trigonometric relation we get</p>
<p> (26)</p>
<fig id="idm1850370300">
<graphic xlink:href="images/image33.png" mime-subtype="png"/>
</fig>
<p>Which simplifies to arrive at the following condition for constructive interference:</p>
<fig id="idm1850369364">
<graphic xlink:href="images/image34.png" mime-subtype="png"/>
</fig>
<p>(27)</p>
<p>Where n is the order of diffraction, λ the wavelength of the X-rays, d the distance of the lattice planes and θ is the Bragg angle and the glancing angle between the incident beam and the reflecting crystals. Equation. (27) is known as Bragg’s Law. The possible 2θ values where we can have reflections are determined by the unit cell dimensions.</p>
<p>However, the intensities of the reflections are determined by the distribution of the electrons in the unit cell. The highest electron density is found around atoms <xref ref-type="bibr" rid="ridm1850098780">50</xref>. XRD measurement allows the calculation of the distance of the lattice planes (d) in the crystal. The grain size of the crystallite is obtained by substituting values of Full Wave Half Maxi-mum (FWHM) in the well-known Debye- Scherrer formula is given by:</p>
<p><inline-graphic xlink:href="images/image35.png" mime-subtype="png"/> (28)</p>
<p>where D is the grain size of the crystallite, K= 0.94, (λ=1.54059Ǻ ) is the wavelength of the Xray source used, β is the broadening of the diffraction line measured at half of its maximum intensity in radians (FWHM) and θ is the angle of diffraction at the peak <xref ref-type="bibr" rid="ridm1850129668">51</xref>.</p>
</sec>
<sec id="idm1842738252">
<title>Scanning Electron Microscope (SEM)</title>
<p>The scanning electron microscope (SEM) is one of the most promising techniques for generating particle distribution profiles as well as surface characteristics with the possibility to visually reevaluate the data by re-assessing the particle. The technique holds promise for characterization of the size and shape of unknown products with relatively wide distribution profiles from the nanometer to the micron range <xref ref-type="bibr" rid="ridm1850060972">52</xref>. Also very frequently, scanning electron microscopes are equipped with energy-dispersive X-ray (EDX) detectors, which are used for analyzing local elemental compositions in thin films. However, the possibilities of analysis in SEM go far beyond imaging and compositional analysis. It will be shown that imaging is divided into that making use of secondary electrons (SE) and of backscattered electrons (BSEs), resulting in different contrasts in the images and thus providing information on compositions, microstructures, and surface potentials. Also, it will be demonstrated how important it is to combine various techniques on identical sample positions, in order to enhance the interpretation of the results obtained from applying individual SEM techniques <xref ref-type="bibr" rid="ridm1850056580">53</xref>.</p>
<p>SEM is one of the most important instruments used for morphology analysis. The SEM generates images by scanning the samples using a focused electron beam. The SEM utilizes a focused electron beam to scan across the surface of the samples then it systematically produces large numbers of signals and these electron signals are converted to a visual signal, which can be displayed on a screen <xref ref-type="bibr" rid="ridm1850105260">48</xref>.</p>
<p>The types of signals produced by an SEM include secondary electrons; back scattered electrons (BSE), characteristic x-rays, light (cathodoluminescence), specimen current and transmitted electrons. These types of signals all require specialized detectors for their detection that are not usually all present on a single machine. When the beam of electrons strikes the surface of the specimen and interacts with the atoms of the sample, signals in the form of secondary electrons, back scattered electrons and characteristics X-rays are generated that contain information about the samples, surface topography, composition, etc. The SEM can produce very high resolution images of the sample surface,revealing details about 1-5 nm in size in its primary detection mode i.e. Secondary electron imaging. Characteristic X-rays are the second most common imaging mode for an SEM. These characteristic X-rays are used to identify the elemental composition of the sample by a technique known as energy dispersive X-ray (EDX). Back-scattered electrons (BSE) that come from the sample may also be used to form an image. Back-scattered electron images are often used in analytical SEM along with the spectra made from the characteristic X-rays as clues to the elemental composition of the sample <xref ref-type="bibr" rid="ridm1850053556">54</xref>. The schematic image of SEM is illustrated as:</p>
</sec>
<sec id="idm1842736164">
<title>UV/VIS Spectrophotometer (UV-VIS)</title>
<p>Ultraviolet-visible spectroscopy (UV-VIS) is a spectroscopy (absorption or reflectance) in the ultraviolet-visible region. The UV-VIS absorption spectroscopy provides information of light absorption as a function of wavelength, which describes the electronic transitions occurring in the measured samples. The UV-VIS spectrophotometer detects the light intensity passing through a sample and compares the detected intensity to incident light intensity (light before it passes through the sample). The absorbance A is simply expressed as Beer’s law:</p>
<fig id="idm1850364972">
<graphic xlink:href="images/image36.png" mime-subtype="png"/>
</fig>
<p>(29)</p>
<p> </p>
<p>Where the ratio is I/I<sub>0</sub> called transmittance, I is the intensity of light passing through the sample and <italic>I</italic><sub>0 </sub>is the intensity of light before passing through the sample <xref ref-type="bibr" rid="ridm1850051180">55</xref>. The optical band gap of materials is a very important parameter that determines the application of the films. It is evaluated using the stern relation formula:</p>
<fig id="idm1850363604">
<graphic xlink:href="images/image37.png" mime-subtype="png"/>
</fig>
<p> </p>
<p> (30)</p>
<p>Where α is absorption coefficient, A is the parameter which depends on the transition probability, ν the frequency of the incident beam, h is Planck’s constant and <italic>hv</italic> is the incident photon energy. For n =1/2, 2, 2/3, 3 allowed direct, allowed indirect, forbidden direct and forbidden indirect transitions, respectively. For direct band gap materials, n = 1/2, and n = 2, for indirect band gap materials. The plot of α2 or (αhν)2 versus photon energy, hν (in electron volts) with extrapolation of the straight line portion of the curve to zero absorption coefficient (hν axis) gives the band gap energy for direct band gap materials. The plot of α1/2 or (αhν)1/2 versus photon energy hν (in electron volts) with extrapolation to zero absorption coefficient (hν axis) gives the band gap energy for indirect band gap materials <xref ref-type="bibr" rid="ridm1850129668">51</xref>. And also the absorption band gap (Eg) has been calculated by using the Tauc relation.</p>
<fig id="idm1850362164">
<graphic xlink:href="images/image38.png" mime-subtype="png"/>
</fig>
<p>(31)</p>
<p>Where A is proportionality constant, h is the Planck’s constant, ν is the frequency of vibration, hν is the photon energy, α is the absorption coefficient and n is either 2 for direct band transitions or 1/2 for indirect band transitions. The absorption coefficient (α) has been calculated using the relation α = 2.303A/t, where t is thickness of the film and A is optical absorbance of film. The direct band gap energy Eg estimated from a Tauc plot of (αhν)2 versus photon energy hν. The value of photon energy (hν) extrapolated to α = 0 gives an absorption edge which corresponds to a band gap Eg <xref ref-type="bibr" rid="ridm1850049524">56</xref>.</p>
</sec>
<sec id="idm1842735300">
<title>Energy Dispersive X-ray Spectroscopy (EDX or EDS)</title>
<p>Energy dispersive X-ray analysis is a technique to analyze near the surface elements and estimate their proportion at different positions, thus giving an overall mapping of the sample. This technique is used in conjunction with SEM. The electron beam strikes a surface of a conducting sample. The energy of the beam is typically in the range 10-20 Kev. This causes X-rays to be emitted from the material. The energy of the X-rays emitted depends on the material under examination. The X-rays are generated in the region about 2 microns in depth, and thus EDX is not truly a surface science technique <xref ref-type="bibr" rid="ridm1850053556">54</xref>. Energy dispersive X-ray spectroscopy (EDX) in the electron microscope has become an important tool for elemental analysis or chemical characterization for all types of solid material. The bombardment of a material with high energy electrons will result in the emission of characteristic X-rays, whose wavelengths depend on the nature of the atoms in the specimen. For the emission of the characteristic X-rays, an atom has to be excited. Thereby an electron from an inner shell will be knocked out. This state is instable and the empty state will be filled up from a more energy-rich electron from an outer shell.</p>
<p>Depending on which shell the more energy-rich electron is coming and in which unoccupied inner shell state it goes, the created X-rays are identified as Kα, Kβ and Lα according to which shell the electron was excited and from which shell the electron fills the empty state. The wavelength of this X-ray can be calculated with the following equation:</p>
<fig id="idm1850360580">
<graphic xlink:href="images/image39.png" mime-subtype="png"/>
</fig>
<p> (32)</p>
<p>Where h is the Planck constant, c the speed of light and ∆E the energy difference of the states involved <xref ref-type="bibr" rid="ridm1850104468">49</xref>.</p>
</sec>
<sec id="idm1842731484">
<title>Transmission Electron Microscopy (TEM)</title>
<p>Transmission electron microscopy is a good complementary technique to XRD for evaluating the crystallography of materials, and it is conventionally applied to obtain microstructure of materials using a high electron beam (≥ 2ookeV). TEM uses the electrons transmitted through a specimen illuminated with a focused beam of electrons to form an image, which is magnified and directed to appear either on a fluorescent screen or layer of photographic film, or to be detected by a sensor such as a charge-coupled device (CCD camera). The electrons are generated by thermionic or field emission accelerated by an electrical field and focused onto the sample using electrical and magnetic fields. A crystalline material interacts with the electron beam mostly by diffraction rather than absorption, although the intensity of the transmitted beam is still affected by the volume and density of the material through which it passes. The specially prepared sample is a very thin (less than 100 nm) slice of material. The electrons pass through the sample and the diffraction pattern and image are formed at the back focus plane and image plane of the objective lens. If we take the back focus plane as the objective plane of the intermediate lens and projector lens, we will obtain the diffraction pattern on the screen. It is said that the TEM works in diffraction mode. If we take the image plane of the objective lens as the objective plane of the intermediate lens and projector lens, we will form an image on the screen. It is the image mode. The resolution of the TEM techniques is usually 0.3nm. In the most powerful diffraction contrast TEM instruments, crystal structure can also be investigated by high resolution transmission electron microscopy (HRTEM), also known as phase contrast imaging as the images are formed due to difference in phase of electron waves scattered through a thin specimen. In HRTEM images, contrast is not intuitively interpretable as the image is influenced by strong aberrations of the imaging lenses in the microscope. Resolution as high as 0.5 Ǻ has been obtained with HRTEM <xref ref-type="bibr" rid="ridm1850045492">57</xref><xref ref-type="bibr" rid="ridm1850043980">58</xref><xref ref-type="bibr" rid="ridm1850039588">59</xref>. <xref ref-type="fig" rid="idm1850356332">Figure 9</xref>, <xref ref-type="fig" rid="idm1850355540">Figure 10</xref></p>
<p>The microstructure of thin films was investigated by transmission electron microscopy (TEM) using a Philips CM20 microscope. In the transmission electron microscopes monochromatic illumination (electron beam with energy from 100 KeV up to 1 MeV) is used to enhance the resolution of TEM Figure 11 <xref ref-type="bibr" rid="ridm1850039012">60</xref>.The principles of image formation in the TEM are the following (<xref ref-type="fig" rid="idm1850352948">Figure 11</xref>): (1) the focused electron beam impinges on the extremely thin (30-60 nm) specimen, (2) the electron beam interacts with the specimen. This interaction results in the scattering of the transmitted electron beam. (3) The objective lens forms a diffraction pattern in the back focal plane with electrons scattered by the sample and combines them to generate an image in the image plane (first intermediate image). Thus, diffraction pattern and image are simultaneously present in TEM. In selected area diffraction mode (SAED), an aperture in the plane of the first intermediate image defines the region for which the diffraction is obtained (<xref ref-type="fig" rid="idm1850352948">Figure 11</xref>). Which of them appears in the plane of the second intermediate image and is magnified by the projective lens on the viewing screen depends on the intermediate lens. Switching from real space (image) to reciprocal space (diffraction pattern) is easily achieved by changing the strength of the intermediate lens <xref ref-type="bibr" rid="ridm1850035916">61</xref>.</p>
<p>When taking an image (<xref ref-type="fig" rid="idm1850352948">Figure 11</xref>), an objective aperture is inserted in the back focal plane of the objective lens to select one or more beams that contribute to the final image (BF, DF, and HRTEM). Including the direct beam into the objective aperture a bright field image is formed (BF), while selecting only scattered beams, a dark field image (DF) can be received. Switching from real space (image) to reciprocal space (diffraction pattern) is easily achieved by changing the strength of the intermediate lens <xref ref-type="bibr" rid="ridm1850035916">61</xref>.</p>
<fig id="idm1850356332">
<label>Figure 9.</label>
<caption>
<title> Schematic image of SEM</title>
</caption>
<graphic xlink:href="images/image40.jpg" mime-subtype="jpg"><alt-text>Figure 9. Schematic image of SEM</alt-text></graphic>
</fig>
<fig id="idm1850355540">
<label>Figure 10.</label>
<caption>
<title> Schematic of the relaxation of an inner-shell-excited atom</title>
</caption>
<graphic xlink:href="images/image41.jpg" mime-subtype="jpg"><alt-text>Figure 10. Schematic of the relaxation of an inner-shell-excited atom</alt-text></graphic>
</fig>
<fig id="idm1850352948">
<label>Figure 11.</label>
<caption>
<title> Schematic of a TEM 60, 61.</title>
</caption>
<graphic xlink:href="images/image42.jpg" mime-subtype="jpg"><alt-text>Figure 11. Schematic of a TEM 60, 61.</alt-text></graphic>
</fig>
</sec>
</sec>
<sec id="idm1842727596" sec-type="conclusions">
<title>Conclusion</title>
<p>In this review, an overview of the deposition methods, thin film characterization and major deposition of thin films has been given. Films may be prepared by many different methods. However, these may usually be classified into chemical or physical methods. In the physical methods the film is deposited from a vapour, maintained at a pressure considerably below that of the atmosphere. Generally, there isn’t an exclusively chemical bath deposition to produce thin films, but there is also chemical vapour deposition, thermal evaporation and electron beam Evaporation to produce thin films. However, in chemical methods the films are deposited from various chemical reactions to generate a vapour. In this review which is briefly summarized characterization of thin films such as X-ray diffraction, Ultraviolet-visible spectroscopy (UV-VIS), Energy Dispersive X-ray Spectroscopy (EDX or EDS) and Transmission electron microscopy (TEM). The image seen with a transmission electron microscope (TEM) is formed by an electron beam that passes through the specimen. A more recent and extremely useful investigative tool is the scanning electron microscope (SEM). With optical microscopy, the light microscope is used to study the microstructure; optical and illumination systems are its basic elements. X-ray diffraction (XRD) is a powerful nondestructive technique for characterizing crystalline materials. </p>
</sec>
<sec id="idm1842727308">
<title>Data Availability</title>
<p>The data that support the findings of this study are available within the article.</p>
</sec>
</body>
<back>
<ack>
<p>The authors would like to acknowledge Debark and Addis Ababa University.</p>
</ack>
<ref-list>
<ref id="ridm1850439508">
<label>1.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Seshan</surname>
<given-names>K</given-names>
</name>
<article-title>Handbook of thin film deposition. 2012: William Andrew</article-title>
</mixed-citation>
</ref>
<ref id="ridm1850444188">
<label>2.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>P</surname>
<given-names>R Brown</given-names>
</name>
<article-title>Energy level modification in lead sulfide quantum dot thin films through ligand exchange. ACS nano</article-title>
<date>
<year>2014</year>
</date>
<volume>8</volume>
<issue>6</issue>
<fpage>5863</fpage>
<lpage>5872</lpage>
<pub-id pub-id-type="doi">10.1021/nn500897c</pub-id></mixed-citation>
</ref>
<ref id="ridm1850446068">
<label>3.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Papadopoulos</surname>
<given-names>N</given-names>
</name>
<name>
<surname>Qiu</surname>
<given-names>W</given-names>
</name>
<name>
<surname>Ameys</surname>
<given-names>M</given-names>
</name>
<name>
<surname>Smout</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Willegems</surname>
<given-names>M</given-names>
</name>
<name>
<surname>Deroo</surname>
<given-names>F</given-names>
</name>
<name>
<surname>Steen</surname>
<given-names>J van der</given-names>
</name>
<name>
<surname>A</surname>
<given-names>J Kronemeijer</given-names>
</name>
<name>
<surname>Dehouwer</surname>
<given-names>M</given-names>
</name>
<name>
<surname>Mityashin</surname>
<given-names>A</given-names>
</name>
<article-title>Touchscreen tags based on thin-film electronics for the Internet of Everything</article-title>
<source>Nat. Electron</source>
<volume>2019</volume>
<fpage>606</fpage>
<lpage>611</lpage>
<pub-id pub-id-type="doi">10.1038/s41928-019-0333-z</pub-id></mixed-citation>
</ref>
<ref id="ridm1850548732">
<label>4.</label>
<mixed-citation xlink:type="simple" publication-type="book">
<name>
<surname>Klee</surname>
<given-names>M</given-names>
</name>
<name>
<surname>Beelen</surname>
<given-names>D</given-names>
</name>
<name>
<surname>Keurl</surname>
<given-names>W</given-names>
</name>
<name>
<surname>Kiewitt</surname>
<given-names>R</given-names>
</name>
<name>
<surname>Kumar</surname>
<given-names>B</given-names>
</name>
<name>
<surname>Mauczokl</surname>
<given-names>R</given-names>
</name>
<name>
<surname>Reimann</surname>
<given-names>K</given-names>
</name>
<name>
<surname>Renders</surname>
<given-names>C</given-names>
</name>
<name>
<surname>Roest</surname>
<given-names>A</given-names>
</name>
<name>
<surname>Roozeboom</surname>
<given-names>F</given-names>
</name>
<article-title>Application of Dielectric, Ferroelectric and Piezoelectric Thin Film Devices in Mobile Communication and Medical Systems</article-title>
<date>
<year>2006</year>
</date>
<chapter-title>In Proceedings of the 15th IEEE International Symposium on the Applications of Ferroelectrics</chapter-title>
<fpage>9</fpage>
<lpage>16</lpage>
<publisher-loc>Sunset Beach, NC, USA</publisher-loc>
<pub-id pub-id-type="doi">10.1109/isaf.2006.4387821</pub-id></mixed-citation>
</ref>
<ref id="ridm1850303012">
<label>5.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Fleming</surname>
<given-names>L</given-names>
</name>
<name>
<surname>Gibson</surname>
<given-names>D</given-names>
</name>
<name>
<surname>Song</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Li</surname>
<given-names>C</given-names>
</name>
<name>
<surname>Reid</surname>
<given-names>S</given-names>
</name>
<article-title>Reducing N2O induced cross-talk in a NDIR CO2 gas sensor for breath analysis using multilayer thin film optical interference coatings</article-title>
<date>
<year>2018</year>
</date>
<source>Surf. Coat. Technol</source>
<volume>336</volume>
<fpage>9</fpage>
<lpage>16</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850299268">
<label>6.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Birney</surname>
<given-names>R</given-names>
</name>
<name>
<surname>Steinlechner</surname>
<given-names>J</given-names>
</name>
<name>
<surname>Tornasi</surname>
<given-names>Z</given-names>
</name>
<name>
<surname>MacFoy</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Vine</surname>
<given-names>D</given-names>
</name>
<name>
<surname>Bell</surname>
<given-names>A</given-names>
</name>
<name>
<surname>Gibson</surname>
<given-names>D</given-names>
</name>
<name>
<surname>Hough</surname>
<given-names>J</given-names>
</name>
<name>
<surname>Rowan</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Sortais</surname>
<given-names>P</given-names>
</name>
<article-title>Amorphous Silicon with Extremely Low Absorption: Beating Thermal Noise in Gravitational Astronomy</article-title>
<date>
<year>2018</year>
</date>
<source>Phys. Rev. Lett</source>
<fpage>121</fpage>
<lpage>191101</lpage>
<pub-id pub-id-type="doi">10.1103/physrevlett.121.191101</pub-id></mixed-citation>
</ref>
<ref id="ridm1850284892">
<label>7.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>tefanov</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Vardhan</surname>
<given-names>T</given-names>
</name>
<name>
<surname>Maraka</surname>
<given-names>H</given-names>
</name>
<name>
<surname>Meagher</surname>
<given-names>R</given-names>
</name>
<name>
<surname>Rice</surname>
<given-names>P</given-names>
</name>
<name>
<surname>Sillekens</surname>
<given-names>J</given-names>
</name>
<name>
<surname>Browne</surname>
<given-names>W</given-names>
</name>
<name>
<surname>D</surname>
<given-names/>
</name>
<article-title>Thin film metallic glass broad-spectrum mirror coatings for space telescope applications</article-title>
<date>
<year>2020</year>
</date>
<source>J. Non Cryst. Solids X</source>
<volume>7</volume>
<fpage>100050</fpage>
<pub-id pub-id-type="doi">10.1016/j.nocx.2020.100050</pub-id></mixed-citation>
</ref>
<ref id="ridm1850271436">
<label>8.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Craig</surname>
<given-names>K</given-names>
</name>
<name>
<surname>Steinlechner</surname>
<given-names>J</given-names>
</name>
<name>
<surname>Murray</surname>
<given-names>P</given-names>
</name>
<name>
<surname>Bell</surname>
<given-names>A</given-names>
</name>
<name>
<surname>Birney</surname>
<given-names>R</given-names>
</name>
<name>
<surname>Haughian</surname>
<given-names>K</given-names>
</name>
<name>
<surname>Hough</surname>
<given-names>J</given-names>
</name>
<name>
<surname>MacLaren</surname>
<given-names>I</given-names>
</name>
<name>
<surname>Penn</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Reid</surname>
<given-names>S</given-names>
</name>
<article-title>Mirror Coating Solution for the Cryogenic Einstein Telescope</article-title>
<date>
<year>2019</year>
</date>
<source>Phys. Rev. Lett</source>
<volume>122</volume>
<fpage>231102</fpage>
<pub-id pub-id-type="doi">10.1103/physrevlett.122.231102</pub-id></mixed-citation>
</ref>
<ref id="ridm1850276044">
<label>9.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Robertson</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Gibson</surname>
<given-names>D</given-names>
</name>
<name>
<surname>MacKay</surname>
<given-names>W</given-names>
</name>
<name>
<surname>Reid</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Williams</surname>
<given-names>C</given-names>
</name>
<name>
<surname>Birney</surname>
<given-names>R</given-names>
</name>
<article-title>Investigation of the antimicrobial properties of modified multilayer diamond-like carbon coatings on 316 stainless steel</article-title>
<date>
<year>2017</year>
</date>
<source>Surf. Coat. Technol</source>
<volume>314</volume>
<fpage>72</fpage>
<lpage>78</lpage>
<pub-id pub-id-type="doi">10.1016/j.surfcoat.2016.11.035</pub-id></mixed-citation>
</ref>
<ref id="ridm1850258204">
<label>10.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Schaefer</surname>
<given-names>C</given-names>
</name>
<name>
<surname>Brä uer</surname>
<given-names>G</given-names>
</name>
<name>
<surname>Szczyrbowski</surname>
<given-names>J</given-names>
</name>
<article-title>Low emissivity coatings on architectural glass</article-title>
<date>
<year>1997</year>
</date>
<source>Surf. Coat. Technol</source>
<volume>93</volume>
<fpage>37</fpage>
<lpage>45</lpage>
<pub-id pub-id-type="doi">10.1016/s0257-8972(97)00034-0</pub-id></mixed-citation>
</ref>
<ref id="ridm1850255540">
<label>11.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Peumans</surname>
<given-names>P</given-names>
</name>
<name>
<surname>Uchida</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Forrest</surname>
<given-names>S</given-names>
</name>
<article-title>Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films</article-title>
<date>
<year>2010</year>
</date>
<source>Mater. Sustain. Energy</source>
<fpage>94</fpage>
<lpage>98</lpage>
<pub-id pub-id-type="doi">10.1142/9789814317665_0015</pub-id></mixed-citation>
</ref>
<ref id="ridm1850252012">
<label>12.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Fthenakis</surname>
<given-names>V</given-names>
</name>
<article-title>Sustainability of photovoltaics: The case for thin-film solar cells</article-title>
<date>
<year>2009</year>
</date>
<source>Renew. Sustain. Energy Rev</source>
<volume>13</volume>
<fpage>2746</fpage>
<lpage>2750</lpage>
<pub-id pub-id-type="doi">10.1016/j.rser.2009.05.001</pub-id></mixed-citation>
</ref>
<ref id="ridm1850265044">
<label>13.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>George</surname>
<given-names>J</given-names>
</name>
<article-title>Preparation of Thin Films</article-title>
<date>
<year>1992</year>
</date>
<publisher-name>Marcel Dekker, Inc</publisher-name>
<publisher-loc>New York</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850262956">
<label>14.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Y</surname>
<given-names>R Toda</given-names>
</name>
<name>
<surname>K</surname>
<given-names>S Chaudhari</given-names>
</name>
<name>
<surname>A</surname>
<given-names>B Jain</given-names>
</name>
<name>
<surname>D</surname>
<given-names>N Gujarathi</given-names>
</name>
<article-title>Structural and Optical Properties of CdSe Thine Films Deposted by Chemical bath deposition Technique. Asian</article-title>
<date>
<year>2011</year>
</date>
<volume>4</volume>
<issue>1</issue>
<fpage>40</fpage>
<lpage>43</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850242212">
<label>15.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>P</surname>
<given-names>M Martin</given-names>
</name>
<article-title>Deposition technologies: an overview, Handbook of deposition technologies for films and coatings, science, application and technology</article-title>
<date>
<year>2010</year>
</date>
<fpage>1</fpage>
<lpage>31</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850240196">
<label>16.</label>
<mixed-citation xlink:type="simple" publication-type="book">
<name>
<surname>P</surname>
<given-names>B Barna</given-names>
</name>
<article-title>Impurity effects in the structural development of thin films, in de</article-title>
<date>
<year>1983</year>
</date>
<chapter-title>Proceedings of the 9th International Vacuum Congress and 5th International congress on solid surfaces, Madrid, Espanole el Vacio</chapter-title>
<fpage>382</fpage>
<lpage>396</lpage>
<publisher-loc>Madrid</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850237388">
<label>17.</label>
<mixed-citation xlink:type="simple" publication-type="book">
<name>
<surname>P</surname>
<given-names>B Barna</given-names>
</name>
<name>
<surname>Adamik</surname>
<given-names>M</given-names>
</name>
<article-title>Growth mechanisms of polycrystalline thin films</article-title>
<date>
<year>1995</year>
</date>
<chapter-title>Science and Technology of Thin Films eds.: Matacotta F. C. and Ottaviani G., World Scientific Publishing Co</chapter-title>
<fpage>1</fpage>
<lpage>28</lpage>
<pub-id pub-id-type="doi">10.1142/9789814261425_0001</pub-id></mixed-citation>
</ref>
<ref id="ridm1850231916">
<label>18.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Petrov</surname>
<given-names>I</given-names>
</name>
<name>
<surname>P</surname>
<given-names>B Barna</given-names>
</name>
<name>
<surname>Hultman</surname>
<given-names>L</given-names>
</name>
<name>
<surname>J</surname>
<given-names>E Greene</given-names>
</name>
<article-title>Structural evolution during film growth</article-title>
<date>
<year>2003</year>
</date>
<source>Journal of Vacuum Science and Technology, A</source>
<volume>21</volume>
<fpage>117</fpage>
<lpage>128</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850246748">
<label>19.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>J</surname>
<given-names>E Greene</given-names>
</name>
<article-title>Thin film nucleation, growth, and microstructural evolution: An Atomic Scale View, in Martin P M, Handbook of deposition technologies for films and coatings, science, Application and Technology, Elsevier</article-title>
<date>
<year>2010</year>
</date>
<fpage>554</fpage>
<lpage>620</lpage>
<pub-id pub-id-type="doi">10.1016/b978-0-8155-2031-3.00012-0</pub-id></mixed-citation>
</ref>
<ref id="ridm1850244516">
<label>20.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Harsha</surname>
<given-names>K S S</given-names>
</name>
<article-title>Principles of Physical Vapor Deposition of Thin Films, Elsevier</article-title>
<date>
<year>2006</year>
</date>
<fpage>400</fpage>
<publisher-loc>Great Britain</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850211908">
<label>21.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Laukaitis</surname>
<given-names>G</given-names>
</name>
<name>
<surname>Ju</surname>
<given-names/>
</name>
<article-title>Dudonis, D.Milcius, Deposition of YSZ thin films using electron beam evaporation technique</article-title>
<date>
<year>2005</year>
</date>
<source>Mater. Sci</source>
<volume>11</volume>
<fpage>268</fpage>
<lpage>271</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850208020">
<label>22.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Yu</surname>
<given-names>G</given-names>
</name>
<name>
<surname>A</surname>
<given-names>V Tyunkov</given-names>
</name>
<name>
<surname>D</surname>
<given-names>B Zolotukhin</given-names>
</name>
<name>
<surname>E</surname>
<given-names>M Oks</given-names>
</name>
<article-title>Electron beam evaporation of boron for ion-plasma coating synthesis at forevacuum pressures</article-title>
<date>
<year>2016</year>
</date>
<source>J. Appl. Phys</source>
<volume>120</volume>
<fpage>233302</fpage>
</mixed-citation>
</ref>
<ref id="ridm1850206364">
<label>23.</label>
<mixed-citation xlink:type="simple" publication-type="book">
<name>
<surname>D</surname>
<given-names>M Mattox</given-names>
</name>
<date>
<year>2010</year>
</date>
<chapter-title>Handbook of Physical Vapor Deposition (PVD) Processing, 2nd Ed., Elsevier/ William Andrew, ISBN</chapter-title>
<fpage>978</fpage>
<lpage>0815520375</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850200460">
<label>24.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Holland</surname>
<given-names>L</given-names>
</name>
<article-title>Vacuum deposition of thin films, Chapman and Hall</article-title>
<date>
<year>1956</year>
</date>
<publisher-loc>London</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850216156">
<label>25.</label>
<mixed-citation xlink:type="simple" publication-type="journal"><name><surname>Akhtar</surname><given-names>M</given-names></name><article-title>Synthesis of Iron Chalcogenide Nanocrystals and Deposition of Thin Films from Single Source Precursors</article-title><date><year>2013</year></date>
PhD Thesis
<institution>the University of Manchester, UK</institution></mixed-citation>
</ref>
<ref id="ridm1850193716">
<label>26.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Powel</surname>
<given-names>C F</given-names>
</name>
<name>
<surname>Oxley</surname>
<given-names>J H</given-names>
</name>
<name>
<surname>Blocher</surname>
<given-names>JM Jr</given-names>
</name>
<article-title>Vapor Depositions</article-title>
<date>
<year>1966</year>
</date>
<publisher-name>Wiley & Sons</publisher-name>
<publisher-loc>New York</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850192780">
<label>27.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Wahl</surname>
<given-names>G</given-names>
</name>
<name>
<surname>Davies</surname>
<given-names>P B</given-names>
</name>
<name>
<surname>Bunshah</surname>
<given-names>R F</given-names>
</name>
<name>
<surname>Joyce</surname>
<given-names>B A</given-names>
</name>
<name>
<surname>Bain</surname>
<given-names>C D</given-names>
</name>
<name>
<surname>Wegner</surname>
<given-names>G</given-names>
</name>
<name>
<surname>Remmers</surname>
<given-names>M</given-names>
</name>
<name>
<surname>Walsh</surname>
<given-names>F C</given-names>
</name>
<name>
<surname>Hieber</surname>
<given-names>K</given-names>
</name>
<name>
<surname>Sundgren</surname>
<given-names>J-E</given-names>
</name>
<name>
<surname>Bachmann</surname>
<given-names>P K</given-names>
</name>
<name>
<surname>Miyazawa</surname>
<given-names>S</given-names>
</name>
<name>
<surname>Thelen</surname>
<given-names>A</given-names>
</name>
<name>
<surname>Strathmann</surname>
<given-names>H</given-names>
</name>
<article-title>Thin Films” Ullmann’s Encyclopedia of Industrial Chemistry</article-title>
<date>
<year>2000</year>
</date>
<publisher-name>Wiley-VCH</publisher-name>
<publisher-loc>Weinheim</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850184572">
<label>28.</label>
<mixed-citation xlink:type="simple" publication-type="book">
<name>
<surname>Tavares</surname>
<given-names>J</given-names>
</name>
<name>
<surname>Swanson</surname>
<given-names>E J</given-names>
</name>
<name>
<surname>Coulombe</surname>
<given-names>S</given-names>
</name>
<date>
<year>2008</year>
</date>
<chapter-title>Plasma Synthesis of Coated Metal Nanoparticles with Surface Properties Tailored for Dispersion. Plasma Processes and Polymers</chapter-title>
<volume>5</volume>
<issue>8</issue>
<fpage>759</fpage>
<pub-id pub-id-type="doi">10.1002/ppap.200800074</pub-id></mixed-citation>
</ref>
<ref id="ridm1850182844">
<label>29.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Chamberlain</surname>
<given-names>R R</given-names>
</name>
<name>
<surname>Skarman</surname>
<given-names>J S</given-names>
</name>
<article-title>Chemical spray deposition process for inorgqanic films</article-title>
<date>
<year>1966</year>
</date>
<source>J Electrochem Soc</source>
<volume>113</volume>
<issue>1</issue>
<fpage>88</fpage>
</mixed-citation>
</ref>
<ref id="ridm1850180828">
<label>30.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Bloem</surname>
<given-names>J</given-names>
</name>
<article-title>Nucleation and growth of silicon by CVD</article-title>
<date>
<year>1980</year>
</date>
<source>J Cryst Groth</source>
<volume>50</volume>
<fpage>581</fpage>
<lpage>604</lpage>
<pub-id pub-id-type="doi">10.1016/0022-0248(80)90002-0</pub-id></mixed-citation>
</ref>
<ref id="ridm1850165900">
<label>31.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Simmler</surname>
<given-names>W</given-names>
</name>
<article-title>Silicon Compounds, Inorganic”, Ullmann’s Encyclopedia of Industrial Chemistry</article-title>
<date>
<year>2005</year>
</date>
<publisher-name>Wiley-VCH</publisher-name>
<publisher-loc>Weinheim</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850164748">
<label>32.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Y</surname>
<given-names>F Nicolau</given-names>
</name>
<article-title>Solution deposition of thin solid compound films by a successive ioniclayer adsorption and reaction process</article-title>
<date>
<year>1985</year>
</date>
<source>Applications of Surface Science</source>
<volume>22</volume>
<issue>23</issue>
<fpage>1074</fpage>
</mixed-citation>
</ref>
<ref id="ridm1850161940">
<label>33.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>S</surname>
<given-names>D</given-names>
</name>
<name>
<surname>C</surname>
<given-names>D Lokhande</given-names>
</name>
<article-title>Deposition of cobalt sulphide thin films by SILAR methods and their characterization</article-title>
<date>
<year>2000</year>
</date>
<source>Indian Journal of pure and Applied Physics</source>
<volume>38</volume>
<fpage>48</fpage>
<lpage>52</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850156324">
<label>34.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>C</surname>
<given-names>D Lokhande</given-names>
</name>
<name>
<surname>H</surname>
<given-names>M Pathan</given-names>
</name>
<article-title>Deposition of metal chalcogenide thin films by successive ionic layer adsorption and reaction (SILAR) method</article-title>
<date>
<year>2004</year>
</date>
<source>Bulletin of Materials Science</source>
<volume>27</volume>
<issue>2</issue>
<fpage>85</fpage>
<lpage>111</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850153588">
<label>35.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Mani</surname>
<given-names>P</given-names>
</name>
<name>
<surname>Manikandan</surname>
<given-names>K</given-names>
</name>
<name>
<surname>A</surname>
<given-names>J Ramya</given-names>
</name>
<name>
<surname>A</surname>
<given-names>I seelan</given-names>
</name>
<name>
<surname>S</surname>
<given-names/>
</name>
<name>
<surname>M</surname>
<given-names>S hameed</given-names>
</name>
<name>
<surname>J</surname>
<given-names/>
</name>
<date>
<year>2014</year>
</date>
<source>Influence of Molar Concentrations on Optical Properties of Copper Sulphide Thin Films by SILAR Method. Int.J. ChemTech Res</source>
<volume>6</volume>
<issue>7</issue>
<fpage>3573</fpage>
<lpage>3578</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850149772">
<label>36.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Savadogo</surname>
<given-names>O</given-names>
</name>
<date>
<year>1998</year>
</date>
<source>Sol. Energy Mat. Sol. Cells</source>
<volume>52</volume>
<fpage>361</fpage>
</mixed-citation>
</ref>
<ref id="ridm1850147684">
<label>37.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>D</surname>
<given-names>A Johnston</given-names>
</name>
<name>
<surname>M</surname>
<given-names>H Carletto</given-names>
</name>
<name>
<surname>Reddy</surname>
<given-names>K T R</given-names>
</name>
<name>
<surname>Forbes</surname>
<given-names>I</given-names>
</name>
<name>
<surname>Miles</surname>
<given-names>R</given-names>
</name>
<article-title>Thin Solid Films</article-title>
<date>
<year>2002</year>
</date>
<fpage>102</fpage>
<lpage>6</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850142716">
<label>38.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Pawar</surname>
<given-names>S</given-names>
</name>
<article-title>Recent status of chemical bath deposited metal chalcogenide and metal oxide thin films. Current Applied Physics</article-title>
<date>
<year>2011</year>
</date>
<volume>11</volume>
<issue>2</issue>
<fpage>117</fpage>
<lpage>161</lpage>
<pub-id pub-id-type="doi">10.1016/j.cap.2010.07.007</pub-id></mixed-citation>
</ref>
<ref id="ridm1850172884">
<label>39.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>A</surname>
<given-names>O</given-names>
</name>
<article-title>Investigating the Optical Properties of Zinc Sulphide Thin Films Deposited from Chemical Acidic Baths</article-title>
<date>
<year>2012</year>
</date>
</mixed-citation>
</ref>
<ref id="ridm1850170508">
<label>40.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Mane</surname>
<given-names>R</given-names>
</name>
<name>
<surname>Lokhande</surname>
<given-names>C</given-names>
</name>
<article-title>Chemical deposition method for metal chalcogenide thin films. Materials Chemistry and Physics</article-title>
<date>
<year>2000</year>
</date>
<volume>65</volume>
<issue>1</issue>
<fpage>1</fpage>
<lpage>31</lpage>
<pub-id pub-id-type="doi">10.1016/s0254-0584(00)00217-0</pub-id></mixed-citation>
</ref>
<ref id="ridm1850123908">
<label>41.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Tadmor</surname>
<given-names>R</given-names>
</name>
<article-title>Line energy and the relation between advancing, receding and Young contact angles,Langmuir</article-title>
<date>
<year>2004</year>
</date>
<volume>20</volume>
<issue>18</issue>
<fpage>7659</fpage>
<pub-id pub-id-type="doi">10.1021/la049410h</pub-id></mixed-citation>
</ref>
<ref id="ridm1850122972">
<label>42.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Ohring</surname>
<given-names>M</given-names>
</name>
<article-title>The Materials Science of Thin Film, 2nd edn</article-title>
<date>
<year>1992</year>
</date>
<publisher-name>Academic Press</publisher-name>
<publisher-loc>Boston</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850119588">
<label>43.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Tjong</surname>
<given-names>S C</given-names>
</name>
<name>
<surname>Chen</surname>
<given-names>H</given-names>
</name>
<article-title>Nanocrystalline materials and coatings</article-title>
<date>
<year>2004</year>
</date>
<source>Mater. Sci. Eng. R</source>
<volume>45</volume>
<fpage>1</fpage>
<lpage>88</lpage>
<pub-id pub-id-type="doi">10.1016/j.mser.2004.07.001</pub-id></mixed-citation>
</ref>
<ref id="ridm1850114980">
<label>44.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Muralt</surname>
<given-names>P</given-names>
</name>
<article-title>Ferroelectric thin films for micro-sensors and actuators: a review</article-title>
<date>
<year>2000</year>
</date>
<source>J. Micromech. Microeng</source>
<volume>10</volume>
<fpage>136</fpage>
<lpage>146</lpage>
<pub-id pub-id-type="doi">10.1088/0960-1317/10/2/307</pub-id></mixed-citation>
</ref>
<ref id="ridm1850111596">
<label>45.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Sze</surname>
<given-names>S M</given-names>
</name>
<article-title>Semiconductor Devices: Physics and Technology, 2nd edn. (Wiley India Pvt</article-title>
<date>
<year>2008</year>
</date>
<publisher-loc>Chichester</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850109580">
<label>46.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Waters</surname>
<given-names>P</given-names>
</name>
<article-title>Stress analysis and mechanical characterization of thin films for microelectronics and MEMS applications</article-title>
<date>
<year>2008</year>
</date>
<institution>University of South Florida</institution>
</mixed-citation>
</ref>
<ref id="ridm1850108428">
<label>47.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Chey</surname>
<given-names>C O</given-names>
</name>
<article-title>Synthesis of ZnO and transition metals doped ZnO nanostructures, their characterization and sensing applications. ping</article-title>
<date>
<year>2014</year>
</date>
<publisher-name>University Electronic Press</publisher-name>
</mixed-citation>
</ref>
<ref id="ridm1850105260">
<label>48.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>R</surname>
<given-names>K PM</given-names>
</name>
<article-title>Spray pyrolysed zinc oxide thin films effects of doping and ion beam irradiation</article-title>
<date>
<year>2007</year>
</date>
</mixed-citation>
</ref>
<ref id="ridm1850104468">
<label>49.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Wochnik</surname>
<given-names>A</given-names>
</name>
<article-title>Synthesis and characterization of nanostructured copperindiumdisulfide and titaniumdioxide thin films for solar cell application</article-title>
<date>
<year>2012</year>
</date>
<fpage>lmu.</fpage>
</mixed-citation>
</ref>
<ref id="ridm1850098780">
<label>50.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Ohring</surname>
<given-names>M</given-names>
</name>
<article-title>The Materials Science of Thin Films</article-title>
<date>
<year>1992</year>
</date>
<fpage>454</fpage>
<publisher-name>Academic Press Inc</publisher-name>
<publisher-loc>San Diego</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850129668">
<label>51.</label>
<mixed-citation xlink:type="simple" publication-type="book">
<name>
<surname>Nwanya</surname>
<given-names>A</given-names>
</name>
<article-title>Structural and optical properties of chemical bath deposited silver oxide thin films: role of deposition time</article-title>
<date>
<year>2013</year>
</date>
<chapter-title>Advances in Materials Science and Engineering</chapter-title>
<pub-id pub-id-type="doi">10.1155/2013/450820</pub-id></mixed-citation>
</ref>
<ref id="ridm1850060972">
<label>52.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Sahoo</surname>
<given-names>S</given-names>
</name>
<name>
<surname>C</surname>
<given-names>K</given-names>
</name>
<name>
<surname>S</surname>
<given-names>C Mishra</given-names>
</name>
<name>
<surname>U</surname>
<given-names>N Nanda</given-names>
</name>
<article-title>Scanning Electron Microscopy as an analytical tool for particle size distribution and aspect ratio analysis of Ciprofloxacin Mucoadhesive Polymeric suspension</article-title>
<date>
<year>2011</year>
</date>
<source>IJRRAS</source>
<volume>6</volume>
<issue>1</issue>
<fpage>94</fpage>
<lpage>100</lpage>
</mixed-citation>
</ref>
<ref id="ridm1850056580">
<label>53.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Abou-Ras</surname>
<given-names>D</given-names>
</name>
<name>
<surname>Kirchartz</surname>
<given-names>T</given-names>
</name>
<name>
<surname>Rau</surname>
<given-names>Uwe</given-names>
</name>
<article-title>Advanced Characterization Techniques for Thin Film Solar Cells,Wiley-VCH</article-title>
<date>
<year>2011</year>
</date>
<publisher-loc>Germany</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850053556">
<label>54.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Joshi</surname>
<given-names>M</given-names>
</name>
<name>
<surname>Bhattacharyya</surname>
<given-names>A</given-names>
</name>
<name>
<surname>S</surname>
<given-names>W Ali</given-names>
</name>
<article-title>Characterization techniques for nanotechnology applications in textiles</article-title>
<date>
<year>2008</year>
</date>
</mixed-citation>
</ref>
<ref id="ridm1850051180">
<label>55.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Kolmakov</surname>
<given-names>A</given-names>
</name>
<name>
<surname>V</surname>
<given-names/>
</name>
<article-title>Analyte multi-sensor for the detection and identification of analyte and a method of using the same. 2013, Google Patents</article-title>
</mixed-citation>
</ref>
<ref id="ridm1850049524">
<label>56.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Triloki</surname>
<given-names>T</given-names>
</name>
<name>
<surname>Rai</surname>
<given-names>R</given-names>
</name>
<name>
<surname>Singh</surname>
<given-names>B</given-names>
</name>
<article-title>Absorbance and Transmittance measurement of CsI thin films</article-title>
<date>
<year>2013</year>
</date>
<source>in DAE Symp. Nucl. Phys</source>
</mixed-citation>
</ref>
<ref id="ridm1850045492">
<label>57.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Kisielowski</surname>
<given-names>C</given-names>
</name>
<article-title>Detection of single atoms and buried defects in three dimensions by aberrtion-corrected electron microscope witth 0.5 Ǻ information limit, microscopy and microanalysis 14:</article-title>
<date>
<year>2008</year>
</date>
<fpage>469</fpage>
<pub-id pub-id-type="doi">10.1017/s1431927608080902</pub-id></mixed-citation>
</ref>
<ref id="ridm1850043980">
<label>58.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>shindo</surname>
<given-names>D</given-names>
</name>
<name>
<surname>kenji</surname>
<given-names>H</given-names>
</name>
<institution>High Resolution Electron Microscopy for Materials Science (Springer Japan,1998)</institution>
<pub-id pub-id-type="doi">10.1007/978-4-431-68422-0</pub-id></mixed-citation>
</ref>
<ref id="ridm1850039588">
<label>59.</label>
<mixed-citation xlink:type="simple" publication-type="journal"><name><surname>Spence</surname><given-names>J</given-names></name><article-title>High Resolution Electron Microscopy Monographs on the physics and chemistry of Materials</article-title><date><year>2008</year></date>
(OUP Oxford,2008)
<pub-id pub-id-type="doi">10.1093/acprof:oso/9780199552757.001.0001</pub-id></mixed-citation>
</ref>
<ref id="ridm1850039012">
<label>60.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>D</surname>
<given-names>B Williams</given-names>
</name>
<name>
<surname>C</surname>
<given-names>B</given-names>
</name>
<article-title>Transmission electron microscopy, A Textbook for Material Science (Plenum</article-title>
<date>
<year>1996</year>
</date>
<publisher-loc>New York</publisher-loc>
</mixed-citation>
</ref>
<ref id="ridm1850035916">
<label>61.</label>
<mixed-citation xlink:type="simple" publication-type="journal">
<name>
<surname>Madou</surname>
<given-names>Marc J</given-names>
</name>
<article-title>Fundamentals of Micro fabrication and Nanotechnology</article-title>
<date>
<year>2012</year>
</date>
</mixed-citation>
</ref>
</ref-list>
</back>
</article>